HN29V51211 Datasheet | Hitachi Semiconductor

Description The Hitachi HN29V51211 Series is a CMOS Flash Memory with AND type multi-level memory cells. It has fully automatic programming and erase capabilities with a single 3.0 V power supply. The functions are controlled by simple external mands. To fit the I/O card applications, the unit of programming and erase is as small as (2048 + 64) bytes. Initial available sectors of HN29V51211 are more than 32,113 (98% of all sector address) and less than 32,768 sectors. Features - On-board single power supply (VCC): VCC = 2.7 V to 3.6 V - Organization  AND Flash Memory: (2048 + 64) bytes × (More than 32,113 sectors)  Data register: (2048 + 64) bytes - Multi-level memory cell  2 bit/per memory cell - Automatic programming  Sector program time: 1.0 ms (typ)  System bus free  Address, data latch function  Internal automatic program verify function  Status data polling function - Automatic erase  Single sector erase time: 1.0 ms (typ)  System bus free  Internal automatic erase verify function  Status data polling function Preliminary: The specification of this device are subject to change without notice. Please contact your nearest Hitachi’s Sales Dept. regarding specification. HN29V51211 Series - Erase mode  Single sector erase ((2048 + 64) byte unit) - Fast serial read access time:  First access time: 50 µs (max)  Serial access time: 50 ns (max) - Low power dissipation:  ICC1 = 2 m A (typ) (Read)  ICC2 = 20 m A (max) (Read)  ISB2 = 50 µA (max) (Standby)  ICC3/ICC4 = 40 m A (max) (Erase/Program)  ISB3 = 20 µA (max) (Deep standby) - The following architecture is required for data reliability.  Error correction: more than 3-bit error correction per each sector read  Spare sectors: 1.8% (579 sectors) within usable sectors Ordering Information Type No. HN29V51211T-50 Available sector More than 32,113 sectors Package 12.0 × 18.40 mm 2 0.5 mm pitch 48-pin plastic TSOP I (TFP-48DA) HN29V51211 Series Pin Arrangement 48-pin TSOP VCC NC- 1 NC- 1 NC- 1 VSS...