HUSB332
HUSB332 is USB Type-C E-Marker manufactured by Hynetek.
FEATURES
USB Type-C 1.4 and PD 3.0 pliant USB-IF Certified. TID: 875, XID: 5400 Support SOP’ munication Integrated transceiver (BMC PHY) Support both structured VDM version 1.0 and 2.0
High integration Embedded both side Ra resistors Embedded both side VCONN diodes Embedded MTP
Different package options: DFN-6L(HFBP-6L) 2mmx2mm, 0.65mm pitch DFN-8L 2mmx3mm, 0.5mm pitch WLCSP-6B, 0.875mmx1.425mm, 0.4mm pitch
Support multiple times programming or fuse lock patible with third party programming tools Support 2.7V ~ 5.5V operation on VCONN1 and VCONN2 pins Custom structured VDM writing through CC pin Slew rate control for BMC signal to reduce EMI 25V high voltage protection on CC, VCONN1 and VCONN2 pins Support Thunderbolt 3 40Gbps data munication Support Get Manufacturer Info mand ±8 k V HBM ESD on CC, VCONN1 and VCONN2 pins e Marker Chip for USB Type-C Cables
APPLICATIONS
USB Type-C Cable ID
GENERAL DESCRIPTION
HUSB332 is a USB Type-C E-Marker for Cable ID applications. It is pliant with USB Type-C Specification Revision 1.4 and USB Power Delivery Specification Revision 3.0. Powered from VCONN1 or VCONN2, HUSB332 can determine to act as SOP’. The built-in MTP can be programmed through CC line or I2C bus so that it will be flexible for in-system programming. The HUSB332 operates over a wide supply range of 2.7 V to 5.5 V. It is available in DFN-6L(HFBP-6L), DFN-8L and WLCSP-6B packages. It is rated over the -40°C to +85°C temperature range.
VBUS CC
VCONN
GND USB TYPE-C PLUG
TYPICAL APPLICATION CIRCUIT
VCONN1 SCL
VCONN2 GND EPAD
Figure 1.HUSB332 Application Diagram
VBUS CC VCONN
GND USB TYPE-C PLUG
Copyright© 2019-2021, Hynetek Semiconductor Co., Ltd. Rev1.9, 05/2021
.hynetek. 1
REVISION HISTORY
Version
Data
V1.0
June 8, 2019
V1.1
August 6, 2019
V1.2
September 6, 2019
V1.3
December 15, 2019
V1.4
May 5, 2020
V1.5
June 8, 2020
V1.6
August 7,...
