HUSB332D
HUSB332D is USB Type-C eMarker manufactured by Hynetek.
FEATURES
- USB Type-C 2.2 and PD 3.1 V1.7 pliant
- USB-IF Certified. TID: 9125
- Support SOP’ munication
- Integrated transceiver (BMC PHY)
- Support both structured VDM version 1.0 and 2.x
- High integration
- Embedded both side Ra resistors
- Embedded both side VCONN diodes
- Different package options:
- DFN1.6×1.6-4L
- DFN2×2-6L
- Support 3 times Programming
- patible with third party programming Tools
- Support 2.7 V ~ 5.75 V operation on VCONN1 and VCONN2 Pins
- 25 V high voltage tolerance on CC, VCONN1 and VCONN2 pins
- Support Thunderbolt 3, Thunderbolt 4 and
USB4® 2.0 80Gbps data munication
- HBM ±8 k V ESD on CC, VCONN1 and VCONN2 pins
APPLICATIONS
USB Type-C Cable ID USB4® Passive Cable
GENERAL DESCRIPTION
HUSB332D is a USB Type-C e Marker for Cable ID applications. It is pliant with USB Type-C Specification Revision 2.2. It is also pliant to USB Power Delivery 3.1 and USB4® Specification.
Powered from VCONN1 or VCONN2, HUSB332D can determine to act as SOP’. The built-in OTP can be programmed through CC line.
The enhanced ±8 KV system ESD protection on the exposed pins can improve the system reliability significantly. The HUSB332D operates over a wide supply range of 2.7 V to 5.75 V. It is available in DFN2×2-6L and DFN1.6×1.6-4L packages. It is rated over the -40 °C to +85 °C temperature range.
TYPICAL APPLICATION CIRCUIT
VBUS CC
VCONN
VCONN1 CC VCONN2 GND
0.1μF/35V 0. 1μF/35V (Opt ional) (Opt ional)
USB TYPE-C PLUG
Figure 1. HUSB332D_UXXDH Typical Application Circuit
VBUS CC VCONN
GND USB TYPE-C PLUG
©2023 Hynetek Semiconductor Co., Ltd. All rights reserved. Rev. 1.1
.hynetek.
DATA SHEET
TABLE OF CONTENTS
Features...
