HUSB332C Datasheet | Hynetek

FEATURES - USB Type-C 2.1 and USB PD 3.1 pliant - Support SOP’ munication - Integrated Transceiver (BMC PHY) - Support Both Structured VDM Version 1.0 and 2.0 - High Integration - Embedded Both Side Ra Resistors - Embedded Both Side VCONN Diodes - Different Package Options: - DFN2×2-6L - Support 4 Times Programming - patible with CC Wire Programming Tools - Support 2.7 V ~ 5.75 V operation on VCONN1 and VCONN2 Pins - 35 V High Voltage Tolerance on CC, VCONN1 and VCONN2 Pins - Support Thunderbolt 3 and Thunderbolt 4 Data munication - Encryption mands Supported for Vendor Identification - Integrated Over-temperature Protection - 0.6 m A Ultra-Low Power Consumption - IEC61000-4-2 Class 3A contact discharge ESD on CC, VCONN1 and VCONN2 pins - Class 3A HBM ESD Rating for all pins APPLICATIONS USB Type-C Cable ID USB4™ Passive Cable GENERAL DESCRIPTION HUSB332C is a USB Type-C e Marker for Cable ID applications. It is pliant with USB Type-C Specification Revision 2.1. It is also pliant to USB Power Delivery 3.1 and USB4™ Specification. Powered from VCONN1 or VCONN2, HUSB332C can determine to act as SOP’. The built-in OTP can be programmed through CC line or I2C bus so that it will be flexible for in-system programming. The enhanced system ESD protection on the exposed pins can improve the system reliability significantly. The HUSB332C operates over a wide supply range of 2.7 V to 5.75 V. It is available in DFN2×2-6L package. It is rated over the -40°C to +85°C temperature range. TYPICAL APPLICATION CIRCUIT VBUS CC VCONN GND VCONN1 SCL VCONN2 GND 0. 1μF/35V 0. 1μF/35V (Opt ional) (Optional) EPAD VCONN1 SCL VCONN2 GND 0.1μF/35V 0. 1μF/35V (Opt ional) (Opt...