HUSB332A Datasheet | Hynetek

FEATURES USB Type-C 2.0 and PD 3.0 pliant USB-IF Certified. TID: 4324, XID: 5403 Support SOP’ munication Integrated transceiver (BMC PHY) Support both structured VDM version 1.0 and 2.0 High integration Embedded both side Ra resistors Embedded both side VCONN diodes Different package options: DFN2×2-6L DFN2×2-8L DFN2×3-8L Support 3 times Programming patible with third party programming Tools Support 2.7V ~ 5.75V operation on VCONN1 and VCONN2 Pins Custom structured VDM writing through CC pin 25V high voltage tolerance and OVP on CC, VCONN1 and VCONN2 pins Support Thunderbolt 3 and USB4TM 40Gbps data munication Support Get Manufacturer Info mand with 22 Free Bytes ±8 k V HBM ESD on CC, VCONN1 and VCONN2 pins e Marker Chip for USB Type-C Cables APPLICATIONS USB Type-C Cable ID USB4™ Passive Cable GENERAL DESCRIPTION HUSB332A is a USB Type-C e Marker for Cable ID applications. It is pliant with USB Type-C Specification Revision 2.0. It is pliant to USB Power Delivery 3.0 and USB4™ Specification. Powered from VCONN1 or VCONN2, HUSB332A can determine to act as SOP’. The built-in OTP can be programmed through CC line or I2C bus so that it will be flexible for in-system programming. The HUSB332A operates over a wide supply range of 2.7 V to 5.75 V. It is available in DFN2×2-6L, DFN2×28L, and DFN2×3-8L packages. It is rated over the 40°C to +85°C temperature range. TYPICAL APPLICATION CIRCUIT VBUS CC VCONN GND VCONN1 SCL VCONN2 GND 0.1μF/25V 0.1μF/25V (Optional) (Optional) EPAD USB TYPE-C PLUG Figure 1.HUSB332A Application Diagram VBUS CC VCONN GND USB TYPE-C PLUG Copyright© 2020-2021, Hynetek Semiconductor Co., Ltd. Rev1.3, 05/2021 .hynetek. 1 REVISION HISTORY Version Data V1.0 October 18, 2020 V1.1 November 11, 2020 V1.2 April 15, 2021 V1.3 May, 2021 Description Release version. Update ordering guide. Remove WLCSP-6B package option. Update package dimension of DFN2×2-8L package. Update Ordering Guide...