KK4052B Datasheet | Kodenshi AUK Group

.. TECHNICAL DATA Analog Multiplexer Demultiplexer High-Performance Silicon-Gate CMOS The KK4052B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON impedance and very low OFF leakage current. Control of analog signals up to 20V peak-to-peak can be achieved by digital signal amplitudes of 4.5 to 20V (if VCC - GND = 3V, a VCC - VEE of up to 13 V can be controlled; for VCC - VEE level differences above 13V a VCC - GND of at least 4.5V is required). These multiplexer circuits dissipate extremely low quiescent power over the full VCC -GND and VCC - VEE supply-voltage ranges, independent of the logic state of the control signals. When a logic “1”is present at the ENABLE input terminal all channels are off. The IW4052 is a differential 4-channel multiplexer having two binary control inputs. A and B, and an enable input. The two binary input signals select 1 of 4 pairs of channels to turned on and connect the analog inputs to the outputs. - Operating Voltage Range: 3.0 to 18 V - Maximum input current of 1µA at 18 V over full package-temperature - range; 100 n A at 18 V and 25°C - Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 2.5 V min @ 15.0 V supply N SUFFIX PLASTIC 16 1 16 1 D SUFFIX SOIC ORDERING INFORMATION KK4052BN Plastic DIP KK4052BD SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM Double-Pole, 4-Position Plus mon Off FUNCTION TABLE Control Inputs Enable B L L L L PIN 16 =VCC PIN 7 = VEE PIN 8 = GND L L H H Select A L H L H X Y0 Y1 Y2 Y3 X0 X1 X2 X3 None ON Channels H X H = high level L = low level X = don’t care .. MAXIMUM RATINGS- Symbol VCC VIN IIN PD Ptot Tstg TL Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Input Current, per Pin Power Dissipation in Still Air Power Dissipation per Output Transistor Storage Temperature Lead Temperature, 1...