KK74HC4052A Datasheet | Kodenshi AUK Group

TECHNICAL DATA Analog Multiplexer/Demultiplexer High-Performance Silicon-Gate CMOS The KK74HC4052A utilise silicon-gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents. These analog multiplexers/demultiplexers control analog voltages that may vary across the plete power supply range (from VCC to VEE). The Channel-Select inputs determine which one of the Analog Inputs/Outputs is to be connected, by means of an analog switch, to the mon Output/Input. When the Enable pin is high, all analog switches are turned off. The Channel-Select and Enable inputs are patible with standard CMOS outputs; with pull-up resistors, they are patible with LS/ALS TTL outputs. - Fast Switching and Propagation Speeds - Low Crosstalk Between Switches - Diode Protection on All Inputs/Outputs - Analog Power Supply Range (VCC-VEE) = 2.0 to 12.0 V - Digital (Control) Power Supply Range (VCC-GND) = 2.0 to 6.0 V - Low Noise 16 1 16 1 D SUFFIX SOIC ORDERING INFORMATION KK74HC4052AN Plastic DIP KK74HC4052AD SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM Double-Pole, 4-Position Plus mon Off FUNCTION TABLE Control Inputs Enable B L L L PIN 16 =VCC PIN 7 = VEE PIN 8 = GND L L L H H Select A L H L H X Y0 Y1 Y2 Y3 X0 X1 X2 X3 None ON Channels H X H = high level L = low level X = don’t care ..net MAXIMUM RATINGS- Symbol VCC VEE VIS VIN I PD Tstg TL - Parameter Positive DC Supply Voltage (Referenced to GND) (Referenced to VEE) Negative DC Supply Voltage (Referenced to GND) Analog Input Voltage Digital Input Voltage (Referenced to GND) DC Input Current Into or Out of Any Pin Power Dissipation in Still Air, Plastic DIP+ SO Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SO Package) Value -0.5 to +7.0 -0.5 to +14.0 -7.0 to +0.5 VEE - 0.5 to VCC+0.5 -1.5 to VCC +1.5 ±25 750 500 -65 to +150 260 Unit V V V V m A m W °C...