KK74HC4053A Datasheet | Kodenshi AUK Group

TECHNICAL DATA Analog Multiplexer/Demultiplexer High-Performance Silicon-Gate CMOS The KK74HC4053A utilize silicon-gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents. These analog multiplexers/demultiplexers control analog voltages that may vary across the plete power supply range (from VCC to VEE). The Channel-Select inputs determine which one of the Analog Inputs/Outputs is to be connected, by means of an analog switch, to the mon Output/Input.When the Enable pin is high, all analog switches are turned off. The Channel-Select and Enable inputs are patible with standard CMOS outputs; with pullup resistors, they are patible with LS/ALSTTL outputs. - Fast Switching and Propagation Speeds - Low Crosstalk Between Switches - Diode Protection on All Inputs/Outputs - Analog Power Supply Range (VCC-VEE)=2.0 to 12.0 V - Digital (Control) Power Supply Range (VCC-GND)=2.0 to 6.0 V - Low Noise ORDERING INFORMATION KK74HC4053AN Plastic KK74HC4053ADW SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM Triple Single-Pole, Double-Position Plus mon Off FUNCTION TABLE Control Inputs Enable C L L L L PIN 16 =VCC PIN 7 = VEE PIN 8 = GND L L L L L L L L H H H H Select B L L H H L L H H A L H L H L H L H X Z0 Z0 Z0 Z0 Z1 Z1 Z1 Z1 Y0 Y0 Y1 Y1 Y0 Y0 Y1 Y1 None X0 X1 X0 X1 X0 X1 X0 X1 ON Channels H X X X = don’t care ..net MAXIMUM RATINGS- Symbol VCC VEE VIS VIN I PD Tstg TL - Parameter Positive DC Supply Voltage (Referenced to GND) (Referenced to VEE) Negative DC Supply Voltage (Referenced to GND) Analog Input Voltage Digital Input Voltage (Referenced to GND) DC Input Current Into or Out of Any Pin Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +7.0 -0.5 to +14.0 -7.0 to +0.5 VEE - 0.5 to VCC+0.5 -1.5 to VCC +1.5 ±25 750 500...