MX25U8033E Datasheet | Macronix

FEATURES GENERAL - Single Power Supply Operation - 1.65 to 2.0 volt for read, erase, and program operations - Serial Peripheral Interface patible -- Mode 0 and Mode 3 - 8M: 8,388,608 x 1 bit structure or 4,194,304 x 2 bits (two I/O read mode) structure or 2,097,152 x 4 bits (four I/O read mode) structure - 256 Equal Sectors with 4K byte each - Any Sector can be erased individually - 32 Equal Blocks with 32K byte each - Any Block can be erased individually - 16 Equal Blocks with 64K byte each - Any Block can be erased individually - Program Capability - Byte base - Page base (256 bytes) - Latch-up protected to 100m A from -1V to Vcc +1V PERFORMANCE - High Performance - Fast read - 1 I/O: 80MHz with 8 dummy cycles - 2 I/O: 80MHz with 4 dummy cycles, equivalent to 160MHz - 4 I/O: 70MHz with 6 dummy cycles, equivalent to 280MHz; - Fast program time: 1.2ms(typ.) and 3.0ms(max.)/page (256-byte per page) - Byte program time: 10us (typ.) - Fast erase time - 30ms(typ.) and 200ms(max.)/sector (4K-byte per sector) - 200ms(typ.) and 1000ms(max.)/block (32K-byte per block) - 500ms(typ.) and 2000ms(max.)/block (64K-byte per block) - 5.0s(typ.) and 10s(max.)/chip - Low Power Consumption - Low active read current: 12m A(max.) at 80MHz, 7m A(max.) at 33MHz - Low active erase/programming current: 25m A (max.) - Low standby current: 8u A (typ.)/30u A (max.) - Low Deep Power Down current: 8u A(max.) - Typical 100,000 erase/program cycles - 20 years data retention SOFTWARE FEATURES - Input Data Format - 1-byte mand code - Advanced Security...