MX5134 Datasheet | MAXINMICRO

features one main output and an extra gate drive output. The PILOT pin logic is plementary to the OUT pin, and can be used to drive a small FET located close to the main power FET. This configuration minimizes the turn off loop and reduces the consequent parasitic inductance. It is particularly useful for driving high speed FETs or multiple FETs in parallel. The MX5134 is available in the 6-pin SOT23 package. FEATURES - 4V to 15V Single Power Supply - 7.6A and 4.5A Peak Sink and Source Drive Current for Main Output - 820m A and 660m A Peak Sink and Source Current for PILOT Output - 0.70Ω Open-drain Pullup Source Output - 10ns (Typical) Propagation Delay - Matching Delay Time Between Inverting and Noninverting Inputs - TTL/CMOS Logic Inputs - Up to 15V Logic Inputs (Regardless of VDD Voltage) Battery Management System Lidar Driver for Distance Test Boost Converters Power Factor Correction Converters Motor Driver GENERAL INFORMATION Ordering information Part Number Description SOT23-6L Package dissipation rating Package RθJA（℃/W） SOT-23 (6) Absolute maximum ratings Parameter VDD to GND IN+ to GND OUT to GND Junction temperature Storage temperature, Tstg Leading temperature （soldering， 10secs） ESD Susceptibility HBM Value -0.3 to 18V -0.3 to 18V -0.3 to VDD+0.3V 150℃ -55 to 150℃ 260℃ ±2000V Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Functional operation of the device at any conditions beyond those indicated in the Remended Operating Conditions section is not implied. Remended operating condition Symbol VDD Junction temperature PD Parameter VDD supply voltage Power dissipation Range 4-15V -40~125℃ 0.59W - Low Input Capacitance: 2.5p F (Typical) TYPICAL...