Datasheet4U Logo Datasheet4U.com

MAX5115 - Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface

General Description

The MAX5115/MAX5116 quad, 8-bit, digital-to-analog converters (DACs) feature nonvolatile registers.

These nonvolatile registers store the DAC operating modes and output states, allowing the DACs to initialize to specified configurations at power-up.

Key Features

  • Nonvolatile Registers Initialize DACs to Stored States.
  • +2.7V to +5.25V Single-Supply Operation.
  • Quad 8-Bit DACs with Independent High and Low Reference Inputs.
  • Rail-to-Rail Output Buffers.
  • Low 200µA per DAC Supply Current.
  • Power-Down Mode Reduces Supply Current to 25µA (max).
  • 400kHz, I2C-Compatible, 2-Wire Serial Interface.
  • Asynchronous MUTE Input (MAX5116).
  • Small 16-/20-Pin QSOP Packages MAX5115/MAX5116 Orderin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5113 14-Bit Current DAC Maxim Integrated
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5121 Serial Voltage-Output DACs Maxim Integrated
MAX5123 Force/Sense DACs Maxim Integrated
MAX5128 Linear-Taper Digital Potentiometer Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5116 Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface
MAX510 Quad / Serial 8-Bit DACs
MAX5100 +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
MAX5101 +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC
MAX5102 +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3586; Rev 0; 2/05 www.DataSheet4U.com Nonvolatile, Quad, 8-Bit DACs with 2-Wire Serial Interface General Description The MAX5115/MAX5116 quad, 8-bit, digital-to-analog converters (DACs) feature nonvolatile registers. These nonvolatile registers store the DAC operating modes and output states, allowing the DACs to initialize to specified configurations at power-up. Precision on-chip output buffers swing rail-to-rail, and provide 8µs settling time. The I2C*-compatible, 2-wire serial interface allows for a maximum clock frequency of 400kHz. The MAX5115 has independent high and low reference inputs allowing maximum output voltage range flexibility. The MAX5116 has single high and low reference inputs for all DACs to minimize trace count and save board space.