SY10E151 Datasheet | Micrel Semiconductor

Micrel, Inc. NOT REMENDED FOR NEW DESIGNS 6-BIT D REGISTER SY1S0YE10105E1151 SY100E151 Features s 1100MHz toggle frequency s Extended 100E VEE range of - 4.2V to - 5.46V s Differential outputs s Asynchronous Master Reset s Dual clocks s Fully patible with industry standard 10KH, 100K ECL levels s Internal 75KΩ input pulldown resistors s Fully patible with Motorola MC10E/100E151 s Available in 28-pin PLCC package DESCRIPTION The SY10/100E151 offer 6 edge-triggered, high-speed, master-slave D-type flip-flops with differential outputs, designed for use in new, high-performance ECL systems. The two external clock signals (CLK1, CLK2) are gated through a logical OR operation before use as clocking control for the flip-flops. Data is clocked into the flip-flops on the rising edge of either CLK1 or CLK2 (or both). When both CLK1 and CLK2 are at a logic LOW, data enters the master and is transferred to the slave when either CLK1 or CLK2 (or both) go HIGH. The MR (Master Reset) signal operates asynchronously to make all Q outputs go to a logic LOW. BLOCK DIAGRAM D0 D1 D2 D3 D4 D5 CLK1 CLK2 Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3 Q4 Q4 Q5 Q5 PIN NAMES Pin D0- D5 CLK1, CLK2 MR Q0- Q5 Q0- Q5 VCCO Function Data Inputs Clock Inputs Master Reset True Outputs Inverting Outputs VCC to Output M9999-052108 hbwhelp@micrel. or (408) 955-1690 Rev.: H Amendment:...