NB7V52M - 1.8V / 2.5V Differential D Flip-Flop

Description

The NB7V52M is a 10 GHz differential D flip

differential asynchronous Reset.

The differential D/D, CLK/CLK and R/R inputs incorporate dual internal 50 W termination resistors and will accept LVPECL, CML, LVDS logic levels.

ON Semiconductor

📥 Download Datasheet

Datasheet Details

Part number	NB7V52M
Manufacturer	ON Semiconductor
File Size	83.68 KB
Description	1.8V / 2.5V Differential D Flip-Flop
Datasheet	NB7V52M Datasheet
Additional preview pages of the NB7V52M datasheet.

📁 Similar Datasheet

NB7200GM - 2-cell Li-ion Battery Protection (Nisshinbo)
NB7232 - Fully compatible with earlier (ETC)

Other Datasheets by ON Semiconductor

NB7V585M - Differential1-to-6 CML clock/data distribution
NB7V586M - 1.8V Differential 2:1 Mux Input to 1.2V/1.8V 1:6 CML Clock/Data Fanout Buffer / Translator
NB7V58M - 1.8 V / 2.5 V / 3.3 V Differential 2:1 Clock / Data Multiplexer / Translator
NB7V32M - Clock Divider
NB7V33M - 1.8V / 2.5V 10GHz Div By 4 Clock Divider
NB7V72M - Differential 2 x 2 Crosspoint Switch
NB7VPQ16M - 1.8V/2.5V CML 12.5 Gbps Programmable Pre-Emphasis Copper/Cable Driver
NB7VPQ701M - 1.8V USB 3.1 Single Channel Re-driver

Full PDF Text Transcription

Click to expand full text

NB7V52M 1.8V / 2.5V Differential D Flip-Flop w/ Reset and CML Outputs Multi−Level Inputs w/ Internal Termination Description The NB7V52M is a 10 GHz differential D flip−flop with a differential asynchronous Reset. The differential D/D, CLK/CLK and R/R inputs incorporate dual internal 50 W termination resistors and will accept LVPECL, CML, LVDS logic levels. When Clock transitions from logic Low to High, Data will be transferred to the differential CML outputs. The differential Clock inputs allow the NB7V52M to also be used as a negative edge triggered device. The 16 mA differential CML outputs provide matching internal 50 W termination and produce 400 mV output swings when externally receiver terminated with a 50 W resistor to VCC.

Published: Aug 25, 2010 |