NCP5181 - High Voltage High and Low Side Driver

onsemi

Key Features

High Voltage Range: up to 600 V.
dV/dt Immunity ±50 V/nsec.
Gate Drive Supply Range from 10 V to 20 V.
High and Low DRV Outputs.
Output Source / Sink Current Capability 1.4 A / 2.2 A.
3.3 V and 5 V Input Logic Compatible.
Up to VCC Swing on Input Pins.
Matched Propagation Delays between Both Channels.
Outputs in Phase with the Inputs.
Independent Logic Inputs to Accommodate All Topologies.
Under V.

NCP5181 high voltage high and low side driver by onsemi - Datasheet Preview

Datasheet Details

Part number	NCP5181
Manufacturer	onsemi
File Size	424.30 KB
Description	High Voltage High and Low Side Driver
Datasheet	NCP5181 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCP511	Low-Dropout Voltage Regulator	ON
NCP51752	4.5-A/9-A Isolated Single Channel Gate Driver	onsemi
NCP500	150mA CMOS Low Noise Low-Dropout Voltage Regulator	ON
NCP5007	Compact Backlight LED Boost Driver	ON
NCP5203	2-in-1 DDR Power Controller	ON

Other Datasheets by onsemi

Part Number	Description
NCP51810	High Speed Half-Bridge Driver
NCP51820	High Speed Half-Bridge Driver
NCP5183	High Voltage High Current High and Low Side Driver
NCP5104	Half Bridge Driver
NCP5106A	High and Low Side Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

NCP5181 High Voltage High and Low Side Driver The NCP5181 is a High Voltage Power MOSFET Driver providing two outputs for direct drive of 2 N−channel power MOSFETs arranged in a half−bridge (or any other high−side + low−side) configuration. It uses the bootstrap technique to insure a proper drive of the High−side power switch. The driver works with 2 independent inputs to accommodate any topology (including half−bridge, asymmetrical half−bridge, active clamp and full−bridge…). Features • High Voltage Range: up to 600 V • dV/dt Immunity ±50 V/nsec • Gate Drive Supply Range from 10 V to 20 V • High and Low DRV Outputs • Output Source / Sink Current Capability 1.4 A / 2.2 A • 3.