PM5382 Description
Advance PM5382 S/UNI®-16x155 16-Channel OC-3c ATM and POS Physical Layer Device.
PM5382 Key Features
- Single chip 16-channel ATM and POS User Network Interface operating at 155 Mbit/s
- Implements the ATM Forum User Network Interface Specification and the ATM physical layer for Broadband ISDN according to
- Implements the Point-to-Point Protocol (PPP) over SONET/SDH specification according to RFC 2615(1619)/1662 of the PPP Wo
- Processes sixteen bit-serial 155 Mbit/s STS-3c (STM-1) data streams with onchip clock and data recovery and clock synthe
- plies with Bellcore GR-253-CORE jitter tolerance, jitter transfer and intrinsic jitter criteria
- Each channel provides termination for SONET Section, Line and Path overhead or SDH Regenerator Section, Multiplexer Sect
- Provides UTOPIA Level 3 32-bit wide System Interface (clocked up to 104 MHz) with parity support for ATM
PM5382 Applications
- Provides SATURN® POS-PHY Level 3™ 32-bit System Interface (clocked up to 104 MHz) for Packet over SONET (POS), or ATM applications
- Supports line loopback from the line side receive stream to the transmit stream and diagnostic loopback from the line side transmit stream to the line side rece
- Provides support for automatic protection switching including a bidirectional 4-bit PECL 622 MHz port for external APS with mate device
- Built-in APS cross-connect for internal and external 1+1 and 1:n protection switching
- Provides a standard five signal IEEE 1149.1 JTAG test port for boundary scan board test purposes
- Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring
- Low power 2.5 V CMOS core logic with 3.3 V CMOS/TTL patible digital inputs and digital outputs. PECL inputs and outputs are 3.3 V patible
- Industrial temperature range (-40 °C to +85 °C)