PI90LV017A Datasheet | Pericom Semiconductor

PI90LV031A PI90LV027A PI90LV017A 3V LVDS High-Speed Differential Line Drivers Features Description - Signaling Rates >400Mbps (200 MHz) - Single 3.3V Power Supply Design The PI90LV031A, PI90LV027A, and PI90LV017A are differential line drivers that use low-voltage differential signaling (LVDS) to support data rates in excess of 400 Mbps. These products are - ±350m VDifferential Swing designed for applications requiring high-speed, low-power con- - Maximum Differential Skew of 0.4ns sumption and low noise generation. - Maximum Propagation Delay of 2.0ns - Maximum Power Dissipation: 25m W @ 200 MHz/driver - Low Voltage TTL (LVTTL) Inputs - Industrial Temperature Operating Range: -40°C to 85°C - Meetsor Exceeds IEEE1596.3 SCI LVDS Standard - Meets or Exceeds ANSI/TIA/EIA-644 S LVDS Standard - Packaging (Pb-free & Green available): O PI90LV017A & PI90LV027A - 8-pin SOIC (W) - 8-pin MSOP (U) L PI90LV031A - 16-pin SOIC (W) E - 16-pin TSSOP (L) TE PI90LV031A A low voltage TTL/CMOS input level is translated by the device into a low-voltage (350m V) differential output signal. Exclusive to the PI90LV031A quad driver is a power-down mode that 3-states the outputs and places the device in a low-power idle state (13m W typical). Applications Applications include point-to-point and multidrop baseband data transmission over controlled impedance media of approximately 100 ohms. The transmission media can be printed circuit board traces, backplanes, or cables. The PI90LV031A, PI90LV027A, PI90LV017A and panion line receivers (PI90LV032A, PI90LV028A, and PI90LV018A) provide new alternatives to RS-232, PECL, and ECL devices for high-speed, point-to-point interface applications. PI90LV027A VCC...