Datasheet4U Logo Datasheet4U.com

RF5110 - 3V GSM POWER AMPLIFIER

General Description

-A3.00 SQ.

Commercial and Consumer Systems

The RF5110 is a high-power, high-efficiency power amplifier module offering high performance in GSM OR GPRS applications.

Key Features

  • Single 2.7V to 4.8V Supply Voltage.
  • +36dBm Output Power at 3.5V APC1 APC2 VCC NC.
  • 32dB Gain with Analog Gain Control.
  • 57% Efficiency 12 11 10 9 RF OUT RF OUT RF OUT RF OUT 16 VCC1 GND1 RF IN GND2 1 2 3 4 5 VCC2 15 14 13.
  • 800MHz to 950MHz Operation.
  • Supports GSM and E-GSM Ordering Information RF5110 RF5110 PCBA 3V GSM Power Amplifier Fully Assembled Evaluation Board 6 VCC2 7 NC 8 2f0 Functional Block Diagram RF Micro Devices,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RF5110G 3V General Purpose/GSM Power Amplifier Qorvo
RF51-26S SPST Vacuum Relays JENNINGS
RF50-26S SPST Vacuum Relays JENNINGS
RF500M Radio Modem Campbell Scientific
RF501 Fast recovery Diodes Rohm

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RF5110G 3V GSM POWER AMPLIFIER
RF5111 3V DCS POWER AMPLIFIER
RF5112 2.4GHz TO 2.5GHz LINEAR POWER AMPLIFIER
RF5117 3V/ 1.8GHz TO 2.8GHz LINEAR POWER AMPLIFIER
RF5117C LINEAR POWER AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com RF5110 0 Typical Applications • 3V GSM Cellular Handsets • 3V Dual-Band/Triple-Band Handsets • GPRS Compatible Product Description -A3.00 SQ. 3V GSM POWER AMPLIFIER • Commercial and Consumer Systems • Portable Battery-Powered Equipment 0.15 C A 2 PLCS The RF5110 is a high-power, high-efficiency power amplifier module offering high performance in GSM OR GPRS applications. The device is manufactured on an advanced GaAs HBT process, and has been designed for use as the final RF amplifier in GSM hand-held digital cellular equipment and other applications in the 800MHz to 950MHz band. On-board power control provides over 70dB of control range with an analog voltage input, and provides power down with a logic “low” for standby operation.