ST2378E Datasheet | STMicroelectronics

Features - High speed - t PD = 15 ns (max.) at TA = 85 °C - VL = 1.8 V - VCC = 5.5 V - Guaranteed data rate - 13 Mbps (1.8 V  VL  VCC  5.5 V) - Low power dissipation - ITS-VL = ITS-VCC = 1 A (max.) at TA = 85 °C - IQVL = 100 A (max.) at TA = 85 °C - IQCC = 10 A (max.) at TA = 85 °C - Output impedance - |IOHA| = 20 A (min.) at VL = 1.8 V; VCC = 5.5 V - IOLA = 1.0 A (min.) at VL = 1.8 V; VCC = 5.5 V - Bidirectional level translation - Totem pole and open drain driving for I2C munications - 5 V tolerant on enable pin - Wide operating voltage range - VL (opr.) = 1.71 V to VCC - VCC (opr.) = 1.71 V to 5.5 V - ESD performance - HBM > 15 k V ESD protection on I/O VCC lines - Lead-free Flip-Chip and TSSOP package Description The ST2378E device is an 8-bit, dual supply, bidirectional level translator with ±15 k V ESD protection on I/Os at VCC side. It is designed to interface data transfer between low voltage ASICs/PLDs and higher voltage systems. Externally applied voltage, VCC and VL, set logic levels at both sides with the range specified as 1.71 V  VL  5.5 V and VL  VCC  5.5 V. For proper operation, VCC should be set higher than VL. Utilizing a transmission-gate-based design, this device allows bidirectional asynchronous data transfer, which means each channel is allowed to have either VCC to VL or VL to VCC data transfer direction independently and no direction pin is required. The ST2378E device operates at a guaranteed data rate of 13 Mbps over the entire specified operating voltage range. Among the other features , the OE pin allows disable mode operation whereby current consumption is reduced to less than 1 μA. Table 1. Device summary Part number Temp. range (°C) Package Marking ST2378EBJR ST2378ETTR -40 to 85 -40 to 85 Flip-Chip20 ST2378E TSSOP20 ST2378E May 2015 This is information on a product in full production. Doc ID009489 Rev...