Datasheet4U Logo Datasheet4U.com

STPIC6C595 - Power logic 8-bit shift register

General Description

This STPIC6C595 is a monolithic, mediumvoltage, low current power 8-bit shift register designed for use in systems that require relatively moderate load power such as LEDs.

The device contains a built-in voltage clamp on the outputs for inductive transient protection.

Key Features

  • Low RDS(on): 4 Ω typ.
  • 30 mJ avalanche energy.
  • Eight 100 mA DMOS outputs.
  • 250 mA current limit capability.
  • 33 V output clamp voltage.
  • Device are cascadable.
  • Low power consumption.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
STP-42D3018 2-Phase Step Motor Interinar
STP04CM596 4-Bit constant current ST Microelectronics
STP06N20 N-Channel MOSFET SamHop Microelectronics
STP08C596 8-BIT CONSTANT CURRENT LED SINK DRIVER ST Microelectronics
STP08CDC596 8-BIT CONSTANT CURRENT LED SINK DRIVER ST Microelectronics

Other Datasheets by STMicroelectronics

Part Number Description
STPIC6A259 POWER LOGIC 8-BIT ADDRESSABLE LATCH
STPIC6D595 Power logic 8-bit shift register
STPIC44L02 4 CHANNEL SERIAL AND PARALLEL LOW SIDE PRE-FET DRIVER
STP03D200 2kV NPN Darlington transistor
STP04CM05 4-bit constant current power-LED sink driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
STPIC6C595 Power logic 8-bit shift register Features ■ Low RDS(on): 4 Ω typ ■ 30 mJ avalanche energy ■ Eight 100 mA DMOS outputs ■ 250 mA current limit capability ■ 33 V output clamp voltage ■ Device are cascadable ■ Low power consumption Description This STPIC6C595 is a monolithic, mediumvoltage, low current power 8-bit shift register designed for use in systems that require relatively moderate load power such as LEDs. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other low-current or medium-voltage loads. The device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register.