STPIC6D595 Datasheet | STMicroelectronics

Power logic 8-bit shift register Features - Low RDS(on): 4 Ω typ - Eight 100 m A DMOS outputs - 250 m A current limit capability - Devices are cascadable - Low power consumption - Footprint patible with STPIC6C595 Description DIP-16 SO-16 TSSOP16 This STPIC6D595 is a monolithic, mediumvoltage, low current power 8-bit shift register designed for use in systems that require relatively moderate load power such as LEDs. The device contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Data transfers through both the shift and storage register clock (SRCK) and the register clock (RCK), respectively. The device transfers data out the serial output (SER OUT) port on the rising edge of SRCK. The storage register transfers data to the output buffer when shift register clear (CLR) is high. When CLR is low, the input shift register is cleared. When output enable (G) is held high, all data in the output buffer is held low and all drain output are off. When G is held low, data from the storage register is transparent to the output buffer. Table 1. Device summary When data in the output buffers is low, the DMOS transistor outputs are off. When data is high, the DMOS transistor outputs have sink-current capability. The SER OUT allows for cascading of the data from the shift register to additional devices. Output are low-side, open-drain DMOS transistors with output ratings of 20 V and 120 m A continuous sink-current capability. Each output provides a 250 m A maximum current limit at TC = 25 °C. The current limit decreases as the junction temperature increases for additional device protection. The device also provides up to 2.0 k V of ESD protection when tested using the human-body model. The STPIC6D595 is characterized for operation over the operating case temperature range of -40 °C to 125 °C. Order codes Package Packaging STPIC6D595MTR STPIC6D595TTR STPIC6D595B1R SO-16 (Tape and reel) TSSOP16 (Tape and...