Datasheet4U Logo Datasheet4U.com

TMC423 - Serial Triple Incremental Encoder Interface

General Description

Copyright © 2004 TRINAMIC Motion Control GmbH & Co.

Key Features

  • The TMC423 is a triple incremental encoder input chip, which interfaces to any SPITM compatible controller. The TMC423 can especially be used in conjunction with the TMC428 triple stepper motor controller to provide position verification or stabilization using some additional software. It integrates 24 bit counters for each encoder to provide a high position resolution without CPU interaction. Further it allows dynamic resolution adaptation to allow direct comparison of encoder counters with mot.

📥 Download Datasheet

Datasheet Details

Part number TMC423
Manufacturer TRINAMIC
File Size 217.25 KB
Description Serial Triple Incremental Encoder Interface
Datasheet download datasheet TMC423 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TMC400A Current Transducer Topstek
TMC-4B28 High power VCSEL TO-46 metal ETC
TMC-4F20 VCSEL TO-46 metal can ETC
TMC-4F28 High power VCSEL TO-46 metal can ETC
TMC-4F30-xxx VCSEL TO-46 metal can ETC

Other Datasheets by TRINAMIC

Part Number Description
TMC4210 Low cost 1-Axis Stepper Motor Controller
TMC424 Serial Triple Incremental Encoder Interface
TMC428 Intelligent Triple Stepper Motor Controller
TMC429 Intelligent Triple Stepper Motor Controller
TMC4330A The S-ramp and sixPoint ramp motion controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TMC423 Data Sheet – (V1.13 / June 20th, 2007) 1/22 TMC 423 – Datasheet Serial Triple Incremental Encoder Interface TCK SDO SDI SCK NSCS SDO428 NSCS428 NINT PRA/IO GND VCCA NC CLK EXT_RES VCCI TRINAMIC Motion Control GmbH & Co. KG Sternstrasse 67 D – 20357 Hamburg GERMANY WWW.TRINAMIC.