Datasheet4U Logo Datasheet4U.com

TPD1045F - Silicon Monolithic Power MOS

Description

Pin No.

Input pin.

This pin is connected to a pull-down resistor internally, so that even when input wiring is open-circuited, output can never be turned on inadvertently.

Features

  • A monolithic power IC with a new structure combining a control block and a vertical power MOSFET (L2-π-MOSⅤ) on single chip.
  • Can directly drive a power load from a CMOS or TTL logic.
  • Built-in protection circuits against overvoltage (active clamp), Over temperature (thermal shutdown), and overcurrent (switching mode).
  • Low Drain-Source ON-resistance: RDS (ON) = 100 mΩ (max) (@VIN = 5 V, ID = 2 A, Tch = 25°C).
  • 8-pin SOP package with embossed-tape pac.

📥 Download Datasheet

Datasheet Details

Part number TPD1045F
Manufacturer Toshiba
File Size 273.09 KB
Description Silicon Monolithic Power MOS
Datasheet download datasheet TPD1045F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPD1039F Low-Side Power Switch Toshiba
TPD1052F Silicon Monolithic Power MOS Toshiba
TPD1053F Silicon Monolithic Power MOS Toshiba
TPD1054F Low-Side Switch Toshiba
TPD1055FA High side power switch Toshiba

Other Datasheets by Toshiba

Part Number Description
TPD1042F Silicon Monolithic Power MOS
TPD1044F Low-Side Switch
TPD1046F 2-IN-1 Low-Side Power Switch
TPD1008SA High-side Power Switch
TPD1011S High-side Power Switch

Full PDF Text Transcription

Click to expand full text
TPD1045F Toshiba Intelligent Power Device Silicon Monolithic Power MOS Integrated Circuit TPD1045F Low-Side Power Switch for Motor, Solenoid and Lamp Drive The TPD1045F is a low-side power switch. The IC has a vertical MOSFET output which can be directly driven from a CMOS or TTL logic circuit (e.g., an MPU). The IC is equipped with intelligent self-protection functions. Features • A monolithic power IC with a new structure combining a control block and a vertical power MOSFET (L2-π-MOSⅤ) on single chip. • Can directly drive a power load from a CMOS or TTL logic. • Built-in protection circuits against overvoltage (active clamp), Over temperature (thermal shutdown), and overcurrent (switching mode).
Published: |