AZ683 Datasheet | ZETTLER Electronics

FEATURES - - - - - - - - AC coils Dielectric strength 5000 Vrms Low cost Flux tight package 10 Amp switching - single pole contacts Isolation spacing greater than 8mm Molded materials: all 94V-0 UL and Canadian file E43203 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 300 W, 2500 VA Max. switched current: 10 A Max. switched voltage: 150 VDC/400 VAC GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at rated load 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Inductive load: (cosØ =0.4) Dielectric Strength 5000 Vrms coil to contact Max. switched power: 150W or 1875VA .. (at sea level for 1 min.) 1000 Vrms between open contacts Max. Switched current: 10A Max. switched voltage: 125VDC or 400 VAC Insulation 1000 megohms min. at 20°C, Resistance 500 VDC 50% RH Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Rated Load UL, CUR Min. Load Material Resistance 10 A 250 VAC, resistive 1/ HP 277 VAC 2 5 VDC, .01 A Silver alloy 30 milliohms initially (6V, 1A method) Greater than 30% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" DA at 10- 55 Hz 10 g PC (94V-0) Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 17 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 576 m W Max. Solder Temp. 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient 36°C (65°F) at nominal coil voltage Max. 105°C (221°F) Max. Solder Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. .marel.ch RELAY ORDERING DATA COIL SPECIFICATIONS - AC...