ZXMS6003G Datasheet | Zetex Semiconductors

Description Self protected low side MOSFET. Monolithic over temperature, over current, over voltage (active clamp) and ESD protected logic level functionality. Intended as a general purpose switch, with status indication and programmable current limit. S D Status IN Rprog .. Top view Note: Rprog must be connected between the Status and IN pins Features - - - - - Current limit programmable via external resistor Status pin (analog status indication) Short circuit protection with auto restart Over voltage protection (active clamp) Thermal shutdown with auto restart - - - - - Over-current protection Input Protection (ESD) Load dump protection (actively protects load) Logic Level Input High continuous current rating Ordering information Device ZXMS6003GTA Part mark ZXMS6003 Reel size (inches) 7 Tape width (mm) 12 Quantity per reel 1,000 Issue 2 - March 2007 © Zetex Semiconductors plc 2007 .zetex. Functional block diagram Status / current limit D Over voltage protection IN Over current protection Logic Over temperature protection Human body ESD protection Applications and information - - - - - - Especially suited for loads with a high in-rush current such as lamps and motors. All types of resistive, inductive and capacitive loads in switching applications. ␮C patible power switch for 12V and 24V DC applications. Automotive rated. Replaces electromechanical relays and discrete circuits. Linear mode capability - the current-limiting protection circuitry is designed to de-activate at low VDS, in order not to promise the load current during normal operation. The design max. DC operating current is therefore determined by the thermal capability of the package/ board bination, rather than by the protection circuitry. Note: This does not promise the product's ability to self-protect during short-circuit load conditions. The current limit is programmable via an external resistor Rprog connected between Status and IN pins. Status pin voltage reflects...