Datasheet4U Logo Datasheet4U.com

SN55LVDS31-SP - HIGH-SPEED DIFFERENTIAL LINE DRIVER

General Description

The SN55LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS).

Key Features

  • 1.
  • QML-V Qualified, SMD 5962-97621.
  • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard.
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load.
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps).
  • Typical Propagation Delay Times of 1.7 ns.
  • Operate From a Single 3.3-V Supply.
  • Power Dissipation 25 mW Typical Per Driver at 200 MHz.
  • Driver at High Impedance When Disabled or.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN52010 2-Channel Speech Controller SONiX
SN52020 2-Channel Speech Controller SONiX
SN52709AL OPERATIONAL AMPLIFIERS ETC
SN531000 Solid State Relays Celduc
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia

Other Datasheets by Texas Instruments

Part Number Description
SN55LVDS31 High-Speed Differential Line Drivers
SN55LVDS32 High-Speed Differential Line Receivers
SN55LVDS32-SP HIGH-SPEED DIFFERENTIAL LINE DRIVER
SN55LVDS33-SP HIGH-SPEED DIFFERENTIAL RECEIVER
SN55LVCP22 CLASS V 2x2 LVDS CROSSPOINT SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN55LVDS31-SP www.ti.com SLLSEB5 – MARCH 2012 HIGH-SPEED DIFFERENTIAL LINE DRIVER Check for Samples: SN55LVDS31-SP FEATURES 1 • QML-V Qualified, SMD 5962-97621 • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps) • Typical Propagation Delay Times of 1.7 ns • Operate From a Single 3.