SN74ALVCH162830 Datasheet | Texas Instruments

FEATURES - Member of the Texas Instruments Widebus™ Family - Output Ports Have Equivalent 26-Ω Series Resistors, So No External Resistors Are Required - Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors - Latch-Up Performance Exceeds 250 m A Per JESD 17 - ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) DESCRIPTION /ORDERING INFORMATION This 1-bit to 2-bit address driver is designed for 1.65-V to 3.6-V VCC operation. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not remended. The outputs, which are designed to sink up to 12 m A, include equivalent 26-Ω resistors to reduce overshoot and undershoot. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. SN74ALVCH162830 1-BIT TO 2-BIT ADDRESS DRIVER WITH 3-STATE OUTPUTS SCES082I - AUGUST 1996 - REVISED JULY 2004 DBB PACKAGE (TOP VIEW) 2Y2 1 1Y2 2 GND 3 2Y1 4 1Y1 5 VCC 6 A1 7 A2 8 GND 9 A3 10 A4 11 GND 12 A5 13 A6 14 VCC 15 A7 16 A8 17 GND 18 A9 19 OE1 20 OE2 21 A10 22 GND 23 A11 24 A12 25 VCC 26 A13 27 A14 28 GND 29 A15 30 A16 31 GND 32 A17 33 A18 34 VCC 35 2Y18 36 1Y18 37 GND 38 2Y17 39 1Y17 40 80 1Y3 79 2Y3 78 GND 77 1Y4 76 2Y4 75 VCC 74 1Y5 73 2Y5 72 GND 71 1Y6 70 2Y6 69 GND 68 1Y7 67 2Y7 66 VCC 65 1Y8 64 2Y8 63 GND 62 1Y9 61 2Y9 60 1Y10 59 2Y10 58 GND 57 1Y11 56 2Y11 55 VCC 54 1Y12 53 2Y12 52 GND 51 1Y13 50 2Y13 49 GND 48 1Y14 47 2Y14 46 VCC 45 1Y15 44 2Y15 43 GND 42 1Y16 41 2Y16 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Widebus is a trademark of Texas...