Datasheet4U Logo Datasheet4U.com

74LVC16373A-Q100 - 16-bit D-type transparent latch

General Description

The 74LVC16373A-Q100 and 74LVCH16373A-Q100 are 16-bit D-type transparent latches with 3-state outputs.

The devices can be used as two 8-bit transparent latches or a single 16-bit transparent latch.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Overvoltage tolerant inputs to 5.5 V.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power dissipation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC16374A 16-bit edge triggered D-type flip-flop Philips
74LVC163 Presettable synchronous 4-bit binary counter Philips
74LVC161 Presettable synchronous 4-bit binary counter Philips
74LVC161284 19-BIT BUS INTERFACE Texas Instruments
74LVC161284 LOW VOLTAGE HIGH SPEED IEEE1284 TRANSCEIVER ST Microelectronics

Other Datasheets by Nexperia

Part Number Description
74LVC16373A 16-bit D-type transparent latch
74LVC16374A 16-bit edge-triggered D-type flip-flop
74LVC16374A-Q100 16-bit edge-triggered D-type flip-flop
74LVC163 Presettable synchronous 4-bit binary counter
74LVC161 Presettable synchronous 4-bit binary counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC16373A-Q100; 74LVCH16373A-Q100 16-bit D-type transparent latch with 5 V tolerant inputs/outputs; 3-state Rev. 4 — 1 October 2021 Product data sheet 1. General description The 74LVC16373A-Q100 and 74LVCH16373A-Q100 are 16-bit D-type transparent latches with 3-state outputs. The devices can be used as two 8-bit transparent latches or a single 16-bit transparent latch. The devices feature two latch enables (1LE and 2LE) and two output enables (1OE and 2OE), each controlling 8-bits. When nLE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding Dinput changes.