| Part Number | 74LS373 Datasheet |
|---|---|
| Manufacturer | Hitachi Semiconductor |
| Overview | Unit: mm 24.50 25.40 Max 20 11 7.00 Max 6.30 1 0.89 1.27 Max 10 1.30 2.54 Min 5.08 Max 7.62 0.51 Min 2.54 ± 0.25 0.48 ± 0.10 0.25 – 0.05 0° – 15° + 0.11 Hitachi Code JEDEC EIAJ Weight (referen. any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information . |
74LS373 Datasheet and Specifications PDF
The 74LS373 is a Octal D-type Transparent Latches.
| Part Number | 74LS373 Datasheet |
|---|---|
| Description | Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops |
| Manufacturer | National Semiconductor |
| Overview | These 8-bit registers feature totem-pole TRI-STATE outputs designed specifically for driving highly-capacitive or relative- ly low-impedance loads The high-impedance state and in- creased high-log. Y Choice of 8 latches or 8 D-type flip-flops in a single package Y TRI-STATE bus-driving outputs Y Full parallel-access for loading Y Buffered control inputs Y P-N-P inputs reduce D-C loading on data lines Connection Diagrams Dual-In-Line Packages ’LS373 Order Number DM54LS373J DM54LS373W DM74LS37. |
| Part Number | 74LS373 Datasheet |
|---|---|
| Description | Latches/Flip-Flops |
| Manufacturer | Signetics |
| Overview |
745
74LS
All
lnputs
1Sul
1LSul
All
Outputs
10Sul
30LSul
NOTE: Where a 74S unit lead (Sui) is 50µA 11H and -2.0mA 11L, and a 74LS unit lead (LSul) is 20µA 11H and - 0.4mA l1L·
PIN CONFIGURA.
* 8-bit transparent latch - '373 * 8-bit positive, edge-triggered register- '374 * 3-State output buffers * Common 3-State Output Enable TYPE 74LS373 74S373 74LS374 TYPICAL PROPAGATION DELAY 19ns 10ns 19ns TYPICAL SUPPLV CURRENT (TOTAL) 24mA 105mA 27mA * Independent register and 3-State 74S374 . |
| Part Number | 74LS373 Datasheet |
|---|---|
| Description | Octal D-Type Flip-Flop |
| Manufacturer | onsemi |
| Overview |
SN74LS373, SN74LS374
Octal Transparent Latch with 3−State Outputs; Octal D−Type Flip−Flop with 3−State Output
The SN74LS373 consists of eight latches with 3-state outputs for bus organized system app.
D-Type Inputs * Buffered Positive Edge-Triggered Clock * Hysteresis on Clock Input to Improve Noise Margin * Input Clamp Diodes Limit High Speed Termination Effects GUARANTEED OPERATING RANGES Symbol Parameter Min Typ Max Unit VCC Supply Voltage TA Operating Ambient Temperature Range 4.75 . |