logo

LM5 Matched Datasheet



Part Number Description Manufacture
LM555
Single Timer

• High-Current Drive Capability: 200 mA
• Adjustable Duty Cycle
• Temperature Stability of 0.005%/°C
• Timing From μs to Hours
• Turn off Time Less Than 2 μs Applications
• Precision Timing
• Pulse Generation
• Delay Generation
• Sequential Timing D
Manufacture
Fairchild Semiconductor
LM5110
Dual 5A Compound Gate Driver
n Independently drives two N-Channel MOSFETs n Compound CMOS and bipolar outputs reduce output current variation Package n SOIC-8 n LLP-10 (4 mm x 4 mm) Ordering Information Order Number LM5110-1/2/3 M LM5110-1/2/3 MX LM5110-1/2/3 SD LM5110-1/2/3 S
Manufacture
National Semiconductor
LM555J
Timer
1
•2 Direct Replacement for SE555/NE555
• Timing from Microseconds through Hours
• Operates in Both Astable and Monostable Modes
• Adjustable Duty Cycle
• Output can Source or Sink 200 mA
• Output and Supply TTL Compatible
• Temperature Stability Bet
Manufacture
Texas Instruments
LM5143-Q1
Automotive 3.5-V to 65-V Dual Synchronous Buck Controller

• AEC-Q100 qualified for automotive applications:
  – Device temperature grade 1:
  –40°C to +125°C ambient operating temperature
• Functional Safety-Capable
  – Documentation available to aid functional safety system design
• Versatile synchronous buck DC
Manufacture
Texas Instruments
LM5157
Boost/SEPIC/Flyback Converter

• Suited for wide operating range for battery applications
  – 2.9-V to 45-V input operating range
  – 48-V maximum output (50-V abs max)
  – Minimum boost supply voltage of 1.5 V when BIAS ≥ 2.9 V
  – Input transient protection up to 50 V
  – Minimized batter
Manufacture
Texas Instruments
LM5163
0.5A Synchronous Buck DC/DC Converter

• Designed for reliable and rugged applications
  – Wide input voltage range of 6V to 100V
  – Junction temperature range:
  –40°C to +150°C
  – Fixed 3ms internal soft-start timer
  – Peak and valley current-limit protection
  – Input UVLO and thermal shutdown
Manufacture
Texas Instruments
LM5035B
PWM Controller
necessary to implement half-bridge topology power converters using voltage mode control with line voltage feed-forward. The LM5035B is a functional variant of the LM5035A halfbridge PWM controller. The LM5035B provides higher maximum duty cycle and h
Manufacture
National Semiconductor
LM5033
100V Push-Pull Voltage Mode PWM Controller
needed to implement Push-Pull, Half-Bridge, and Full-Bridge topologies. Applications include closed loop voltage mode converters with a highly regulated output voltage, or an open loop "DC transformer" such as an Intermediate Bus Converter (IBC) with
Manufacture
National Semiconductor
LM5160-Q1
Wide Input 65-V 2-A Synchronous Buck / Fly-Buck DC/DC Converter

•1 AEC-Q100 Qualified for Automotive Applications
  – Temperature Grade 1:
  –40°C ≤ TA ≤ 125°C
  – HBM ESD Classification Level 2
  – CDM ESD Classification Level C5
• Wide 4.5-V to 65-V Input Voltage Range
• Integrated High-Side and Low-Side Switches
  – No
Manufacture
Texas Instruments
LM5037
Dual-Mode PWM Controller
necessary to implement balanced double-ended power converter topologies, such as push-pull, half-bridge and full-bridge. These double-ended topologies allow for higher efficiencies and greater power densities compared to common singleended topologies
Manufacture
National Semiconductor

Total 484 results






logo
Since 2006. D4U Semicon.   |   Contact Us   |   Privacy Policy   |   Site map