·
44 Hits
low standby power and low start current. In standby mode, the
circuit enters burst mode to reduce the standby power dissipation.
The switch frequenc...
·
40 Hits
Low voltage operation: Start-up is guaranteed from 0.9V(IOUT =1 mA ) Duty ratio: Built-in PWM/PFM switching control circuit 15 to 78 % . oscillator fr...
·
40 Hits
low standby power and low start current. In standby
mode, the circuit enters burst mode to reduce the standby
power dissipation.
The switch frequen...
·
23 Hits
low standby power and low start current. In standby
mode, the circuit enters burst mode to reduce the standby power
dissipation.
The switch frequen...
·
17 Hits
Input Voltage : 1.2V to 12V Low Quiescent Current : 17uA (typ.) Low Saturation Voltage : 200mV Typical at 300mA 350mA Typical Switching Current Limiti...
·
13 Hits
º
The BL8530 series are CMOS-based PFM step-up DC-DC Converter. The converter can start up by supply voltage as low as 0.8V, and capable of deliverin...
·
12 Hits
along with its small package and low current consumption, makes the S-8321/8322 Series ideal for the power supply of portable equipment. A built-in p...
·
12 Hits
include variable dead time, operating frequency up to 600 kHz, protections such as LUVLO, and a selectable latch or A/R protection using the LS pin fo...
·
10 Hits
The CE8301 Series is a CMOS PFM-control z Low voltage operation: Startup at 0.9 V
step-up switching DC/DC converter. The PFM
min. (IOUT = 1 mA) gua...
·
8 Hits
allowing series connection of the white LEDs so that the LED currents are identical for uniform brightness. An enable input can be pulsed repeatedly t...
This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy