logo
RAIL-TO-RAIL

RAIL-TO-RAIL DataSheet

GAINSIL

GS8552 - 1.5MHZ Zero-Drift CMOS Rail-to-Rail IO Opamp

 · 22 Hits • Single-Supply Operation from +2.1V ~ +5.5V • Rail-to-Rail Input / Output • Gain-Bandwidth Product: 1.5MHz (Typ. @25°C) • Low Input Bias Current: 20p...
Giantec Semiconductor

GT7162 - Rail-to-Rail Operational Amplifier

 · 21 Hits  Single-Supply Operation from +2.5V ~ +5.5V  Rail-to-Rail Input / Output  Gain-Bandwidth Product: 1.5 MHz (Typ.)  Quiescent Current per Amplifier:...
Maxim Integrated

MAX4483 - Rail-to-Rail Op Amps

 · 20 Hits ●● Single +2.5V to +5.5V Supply Voltage Range ●● 50μA Quiescent Current per Amplifier ●● 0.5μA (max) Shutdown Mode (MAX4481) ●● Available in Space-Sav...
ON Semiconductor

NCP137 - Very Low Dropout Bias Rail CMOS Voltage Regulator

 · 19 Hits low IQ consumption. The WLCSP6 1.2 mm x 0.8 mm Chip Scale package is optimized for use in space constrained applications. Features • Input Voltage Ran...
GAINSIL

GS8632 - 6-MHZ CMOS Rail-to-Rail I/O Opamps

 · 19 Hits • Single-Supply Operation from +2.1V ~ +5.5V • Rail-to-Rail Input / Output • Gain-Bandwidth Product: 6MHz (Typ.) • Low Input Bias Current: 1pA (Typ.)...
Advanced Linear Devices

ALD2711A - DUAL MICROPOWER PRECISION RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER

 · 18 Hits combined with extremely low input currents, high open loop voltage gain, high useful bandwidth, and slew rate make the ALD2711A/ALD2711B/ALD2711 a ve...
Advanced Linear Devices

ALD4702B - QUAD 5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER

 · 18 Hits coupled with extremely low input currents, high voltage gain, useful bandwidth of 1.5MHz, a slew rate of 2.1V/µs, low power dissipation, low offset v...
National Semiconductor

LM6134 - Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers

 · 17 Hits (For 5V Supply, Typ Unless Noted) n Rail-to-Rail input CMVR −0.25V to 5.25V n Rail-to-Rail output swing 0.01V to 4.99V n High gain-bandwidth, 10 MHz a...
Texas Instruments

UCD90124A - 12-Rail Power-Supply Sequencer/Monitor

 · 17 Hits •1 Monitor and sequence 12 voltage rails – All rails sampled every 400 μs – 12-bit ADC with 2.5-V, 0.5% internal VREF – Sequence based on time, rail a...
Texas Instruments

TLV2462A-Q1 - Low-Power Rail-to-Rail Input/Output Operational Amplifiers

 · 17 Hits • Qualified for Automotive Applications • AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 1: –40°C to +125°C Ambient Operati...
Advanced Linear Devices

ALD2701A - DUAL MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER

 · 16 Hits combined with extremely low input currents, high open loop voltage gain of 100V/mV, useful bandwidth of 700KHz, a slew rate of 0.7V/µs, low power dis...
Unisonic Technologies

ULV1546 - 20V HIGH CURRENT DRIVE RAIL-TO-RAIL VCOM/GAMMA BUFFER

 · 16 Hits * Wide Supply Operation Range +5V~+20V * Beyond the rails input capability * Rail-to-rail output swing * Low supply current, 1.2mA per amplifier (typi...
RUNIC

RS6334 - Rail-to-Rail I/O CMOS Operational Amplifier

 · 16 Hits • HIGH GAIN BANDWIDTH:1.1MHz • RAIL-TO-RAIL INPUT AND OUTPUT 0.6mV Typical Vos • INPUT VOLTAGE RANGE: -0.1V to +5.6V with Vs = 5.5V • SUPPLY RANGE: +2...
Analog Devices

AD8032 - Rail-to-Rail I/O Amplifiers

 · 15 Hits Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, −3 dB bandwid...
STMicroelectronics

LMV321 - Input/output rail-to-rail operational amplifier

 · 15 Hits • Operating range from VCC = 2.7 to 6 V • Rail-to-rail input and output • Extended Vicm (VDD - 0.2 V to VCC + 0.2 V) • Low supply current (145 µA) • G...
STMicroelectronics

TSV911A - rail-to-rail input/output 8 MHz operational amplifiers

 · 15 Hits ■ Rail-to-rail input and output ■ Wide bandwidth ■ Low power consumption: 820 µA typ ■ Unity gain stability ■ High output current: 35 mA ■ Operating f...
Advanced Linear Devices

ALD4702A - QUAD 5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER

 · 15 Hits coupled with extremely low input currents, high voltage gain, useful bandwidth of 1.5MHz, a slew rate of 2.1V/µs, low power dissipation, low offset v...
GAINSIL

GS8042 - 14.5KHZ CMOS Rail-to-Rail I/O Opamp

 · 15 Hits · Single-Supply Operation from +1.4V ~ +5.5V · Rail-to-Rail Input / Output · Gain-Bandwidth Product: 14.5KHz (Typ.) · Low Input Bias Current: 1pA (Ty...
GMT

G1584 - Quadruple Rail-to-Rail Operational Amplifiers

 · 14 Hits make this amplifier ideal for use as reference buffers for TFT-LCD. Other applications include battery power, portable devices, and anywhere low power...
Texas Instruments

TLV2772A-EP - 2.7 V High-Slew-Rate Rail-to-Rail Output Op Amps

 · 14 Hits reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, t...
logo
Since 2006. D4U Semicon.   |   Contact Us   |   Privacy Policy