AP22818 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Product Overview

DIODES

Datasheet Details

Part number	AP22818
Manufacturer	DIODES
File Size	1.29 MB
Description	1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
Datasheet	AP22818 Datasheet
Note	This datasheet PDF includes multiple part numbers: AP22818, AP22816. Please refer to the document for exact specifications by model.
Additional preview pages of the AP22818 datasheet.

Product details

Description

The DIODES™ AP22816/17/18 is a single-channel, current-limited, integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications.

Features

Input Voltage Range: 2.7V to 5.5V.
75mΩ On-resistance.
Built-in Soft-start with 0.6ms Typical Rise Time.
Fault Report (FLG) with Blanking Time (6ms Typ. ).
ESD Protection: 2kV HBM, 500V CDM.
Logic Level Enable Pin: Available with Active-high or Active-low Versions.
Protections:.
Overcurrent Protection with Auto Recovery.
Short-Circuit Protection with Auto Recovery.
Overtemperature Protection with Auto Recovery.
Output Reverse Current / Volta.

📁 Similar Datasheet

AP2281 - Single Slew Rate Controlled Load Switch (Diodes)
AP22811 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (Diodes)
AP22814 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (Diodes)
AP22815 - SINGLE CHANNEL POWER DISTRIBUTION SWITCH (Diodes)
AP2280 - Single Channel Slew Rate Controlled Load Switch (Diodes)
AP22800 - 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH (Diodes)
AP22802 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (Diodes)
AP22804 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (Diodes)

Other Datasheets by DIODES

AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22817 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP220309 - 4A LOAD SWITCH
AP2210 - 300mA RF ULDO REGULATOR
AP221448 - 2.5A LOAD SWITCH
AP221614 - 4A LOAD SWITCH

Published: Nov 30, 2023 |