900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Eutech Microelectronics

EUP3423 Datasheet Preview

EUP3423 Datasheet

Synchronous Step-Down Converter

No Preview Available !

EUP3423
3.2A, Synchronous Step-Down Converter
DESCRIPTION
The EUP3423 is a 1 MHz fixed frequency synchronous,
current-mode, step-down dc-dc converter capable of
providing up to 3.2A output current. The EUP3423
operates from an input range of 2.7V to 5.5V and
provides a regulated output voltage from 0.8V to 5V.
The internal synchronous power switch improves
efficiency and eliminates the need for an external
Schottky diode. Forced PWM operation provides very
low output ripple voltage for noise sensitive
applications.
The EUP3423 features short circuit and thermal
protection circuits to improve system reliability.
Externally adjustable soft-start avoids input inrush
current during startup. The EUP3423 is available in
SOP-8 (EP) package.
FEATURES
2.7V to 5.5V Input Voltage Range
High Efficiency up to 96%
3.2A Available Load Current
100/60mIntegrated PFET/NFET Switches
1MHz Switching Frequency
100% Duty Cycle Low Dropout Operation
Short Circuit and Thermal Protection
Integrated UVLO
Excellent Line and Load Transient Response
Available in SOP-8(EP) Package
RoHS Compliant and 100% Lead(Pb)-Free
Halogen-Free
APPLICATIONS
High Performance DSPs, FPGAs, ASICs and
Microprocessors
Base Station, Telecom, and Networking
Equipment Power Supplies
ePC and NetPCs
Typical Application Circuit
DS3423 Ver1.1 May 2012
Figure1. Typical Application Circuit
1




Eutech Microelectronics

EUP3423 Datasheet Preview

EUP3423 Datasheet

Synchronous Step-Down Converter

No Preview Available !

Pin Configurations
Package Type
Pin Configurations
EUP3423
SOP-8 (EP)
Pin Description
PIN SOP-8 (EP)
DESCRIPTION
AVIN
1 Analog input supply which is connected to PVIN through a low pass RC filter.
SS
2
Soft-start pin. An internal pull up current source charges an external capacitor to set
the soft-start ramp rate.
GND
3 Analog ground.
FB 4 Feedback pin. Connect it to an external resistor divider to set output voltage.
EN
5
Chip enable pin. Forcing this pin above 1.5V enables the part. Forcing this pin below
0.3V shut down the device.
PGND
6 Power ground.
LX
7
Switch node connected to inductor. This pin is connected to the drains of the internal
main and synchronous power MOSFET switches.
PVIN
8 Bypass with a 10µF or 22µF ceremic capacitor to ground.
Thermal Pad - Ground.( Thermal pad is used as the ground of whole chip.)
DS3423 Ver1.1 May 2012
2


Part Number EUP3423
Description Synchronous Step-Down Converter
Maker Eutech Microelectronics
PDF Download

EUP3423 Datasheet PDF






Similar Datasheet

1 EUP3420 Synchronous Step-Down Converter
Eutech Microelectronics
2 EUP3421 Synchronous Step-Down Converter
Eutech Microelectronics
3 EUP3423 Synchronous Step-Down Converter
Eutech Microelectronics
4 EUP3425 Synchronous Step-Down Converter
Eutech Microelectronics
5 EUP3426 Synchronous Step-Down Converter
Eutech Microelectronics
6 EUP3427 Synchronous Step-Down Converter
Eutech
7 EUP3427 Synchronous Step-Down Converter
Eutech Microelectronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy