HMN5128D Datasheet | Hanbit Electronics

DESCRIPTION The HMN5128D Nonvolatile SRAM is a 4,194,304-bit static RAM organized as 524,288 bytes by 8 bits. The HMN5128D has a self-contained lithium energy source provide reliable non-volatility coupled with the unlimited write cycles of standard SRAM and integral control circuitry which constantly monitors the single 5V supply for an out-oftolerance condition. When such a condition occurs, the lithium energy source is automatically switched on to sustain the memory until after Vcc returns valid and write protection is unconditionally enabled to prevent garbled data. In addition the SRAM is unconditionally write-protected to prevent an inadvertent write operation. At this time the integral energy source is switched on to sustain the memory until after VCC returns valid. The HMN5128D uses extremely low standby current CMOS SRAM’s, coupled with small lithium coin cells to provide nonvolatility without long write-cycle times and the write-cycle limitations associated with EEPROM. FEATURES w Access time : 70, 85,120, 150 ns w High-density design : 4Mbit Design w Battery internally isolated until power is applied w Industry-standard 32-pin 512K x 8 pinout w Unlimited write cycles w Data retention in the absence of VCC w 10-years minimum data retention in absence of power w Automatic write-protection during power-up/power-down cycles w Data is automatically protected during power loss w Conventional SRAM operation; unlimited write cycles A18 PIN ASSIGNMENT A16 A14 A12 A7 A6 A5 A4 A3 A2 A1 A0 DQ0 DQ1 DQ2 VSS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 VCC A15 A17 /WE A13 A8 A9 A11 /OE A10 /CE DQ7 DQ6 DQ5 DQ4 DQ3 32-pin Encapsulated Package OPTIONS w Timing 70 ns 85 ns 120 ns 150 ns MARKING -70 -85 -120 -150 URL : .hbe.co.kr Rev. 0.0 (April, 2002) HANBit Electronics Co.,Ltd HANBit FUNCTIONAL DESCRIPTION The HMN5128D executes a read cycle whenever /WE is inactive(high) and /CE is active(low). The address...