Datasheet4U Logo Datasheet4U.com

HD74ALVCH16836 - 20-bit Universal Bus Driver with 3-state Outputs

Description

This 20-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation.

Data flow from A to Y is controlled by the output enable (O E) input.

The device operates in the transparent mode when the latch enable (LE) input is low.

Features

  • VCC = 2.3 V to 3.6 V.
  • Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C).
  • Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C).
  • High output current ±24 mA (@VCC = 3.0 V).
  • Bus hold on data inputs eliminates the need for external pullup / pulldown resistors HD74ALVCH16836 Function Table Inputs OE H L L L L L L LE X L L H H H H CLK X X X ↑ ↑ H L A X L H L H X X Z L H L H Y0 Y0.
  • 1.
  • 2 Output Y H : High level L : Low level X : Immat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74ALVCH16831 1-to 4 Address Register / Driver Renesas
HD74ALVCH16820 3.3-V 10-bit Flip Flops Renesas
HD74ALVCH16827 20-bit Buffers / Drivers Renesas
HD74ALVCH162244 16-bit Buffers / Drivers Renesas
HD74ALVCH162270 12-bit to 24-bit Registered Bus Exchanger Renesas

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD74ALVCH16830 1-bit to 2-bit Address Driver with 3-state Outputs
HD74ALVCH16831 1-to 4 Address Register / Driver with 3-state Outputs
HD74ALVCH16835 18-bit Universal Bus Driver with 3-state Outputs
HD74ALVCH16820 3.3-V 10-bit Flip Flops with Dual Outputs
HD74ALVCH16821 3.3-V 20-bit Bus Interface Flip Flops with 3-state Outputs

Full PDF Text Transcription

Click to expand full text
HD74ALVCH16836 20-bit Universal Bus Driver with 3-state Outputs ADE-205-213 (Z) Preliminary 1st. Edition January 1998 Description This 20-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation. Data flow from A to Y is controlled by the output enable (O E) input. The device operates in the transparent mode when the latch enable (LE) input is low. The A data is latched if the clock (CLK) input is held at a high or low logic level. If LE is high, the A data is stored in the latch flip flop on the low to high transition of CLK. When OE is high, the outputs are in the high impedance state.
Published: |