900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




International Rectifier Electronic Components Datasheet

HFA200MD40D Datasheet

Ultrafast Soft Recovery Diode

No Preview Available !

PD-2.510 rev. A 02/99
HEXFREDTM
Features
• Reduced RFI and EMI
• Reduced Snubbing
• Extensive Characterization of
Recovery Parameters
HFA200MD40D
Ultrafast, Soft Recovery Diode
Anode AC Cathode
12
Isolated Base
VR = 400V
VF(typ.)ƒ = 0.9V
IF(AV) = 200A
Qrr (typ.) = 330nC
IRRM(typ.) = 8.1A
trr(typ.) = 45ns
di(rec)M/dt (typ.)ƒ = 270A/µs
Description
HEXFREDTM diodes are optimized to reduce losses and EMI/RFI in high frequency
power conditioning systems. An extensive characterization of the recovery
behavior for different values of current, temperature and di/dt simplifies the
calculations of losses in the operating conditions. The softness of the recovery
eliminates the need for a snubber in most applications. These devices are
ideally suited for power converters, motors drives and other applications
where switching losses are significant portion of the total losses.
Absolute Maximum Ratings (per Leg)
TO-244AB
(ISOLATED)
VR
IF @ TC = 25°C
IF @ TC = 100°C
IFSM
EAS
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Parameter
Cathode-to-Anode Voltage
Continuous Forward Current
Continuous Forward Current
Single Pulse Forward Current 
Non-Repetitive Avalanche Energy ‚
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max.
400
172
83
1200
1.4
278
111
-55 to +150
Units
V
A
mJ
W
C
Thermal - Mechanical Characteristics
Parameter
Min. Typ. Max. Units
RthJC
RthCS
Junction-to-Case, Single Leg Conducting
Junction-to-Case, Both Legs Conducting
Case-to-Sink, Flat , Greased Surface
––––
––––
––––
––––
––––
0.10
0.45
0.23
––––
°C/W
K/W
Wt Weight
––––
79 (2.8)
–––– g (oz)
Mounting Torque „
Terminal Torque
30 (3.4)
30 (3.4)
––––
––––
40 (4.6) lbf•in
40 (4.6) (N•m)
Vertical Pull
2 inch Lever Pull
––––
––––
––––
––––
80 lbf•in
35
Note:  Limited by junction temperature
‚ L = 100µH, duty cycle limited by max TJ
ƒ 125°C
„ Mounting surface must be smooth, flat, free or burrs or other
protrusions. Apply a thin even film or thermal grease to mounting
surface. Gradually tighten each mounting bolt in 5-10 lbf•in steps
until desired or maximum torque limits are reached. Module
1


International Rectifier Electronic Components Datasheet

HFA200MD40D Datasheet

Ultrafast Soft Recovery Diode

No Preview Available !

HFA200MD40D
PD-2.510 rev. A 02/99
Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)
Parameter
Min. Typ. Max. Units
Test Conditions
VBR
Cathode Anode Breakdown Voltage
400 ––– ––– V IR = 100µA
VFM Max Forward Voltage
IRM Max Reverse Leakage Current
––– 1.0 1.2
––– 1.2 1.4
––– 0.9 1.1
––– 2.0 12
––– 3.0 16
IF = 100A
V IF = 200A
See Fig. 1
IF = 100A, TJ = 125°C
µA VR = VR Rated
See Fig. 2
mA TJ = 125°C, VR = 320V
CT Junction Capacitance
LS Series Inductance
––– 370 500 pF VR = 200V
See Fig. 3
––– 5.0 ––– nH From top of terminal hole to mounting
plane
Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)
Parameter
Min. Typ. Max. Units
Test Conditions
trr
trr1
trr2
IRRM1
IRRM2
Qrr1
Qrr2
di(rec)M/dt1
di(rec)M/dt2
Reverse Recovery Time
Peak Recovery Current
Reverse Recovery Charge
Peak Rate of Fall of Recovery Current
During tb
––– 45 –––
IF = 1.0A, dif/dt = 200A/µs, VR = 30V
––– 81 120 ns TJ = 25°C See Fig.
––– 260 390
TJ = 125°C
5
IF = 100A
––– 8.1 15
––– 17 30
A TJ = 25°C See Fig.
TJ = 125°C
6
VR = 200V
––– 330 890 nC TJ = 25°C See Fig.
––– 2200 6000
TJ = 125°C 7 dif/dt = 200A/µs
––– 290 ––– A/µs TJ = 25°C See Fig.
––– 270 –––
TJ = 125°C
8
80.01 (3.150)
40.26 (1.585)
39.75 (1.565)
7.49 (0.295)
6.99 (0.275) DIA.
(2 PLCS.)
23.55 (0.927)
20.42 (0.804)
2
34.925 (1.375)
REF.
63.50 (2.500)
60.96 (2.400)
1 23
92.71 (3.650)
90.17 (3.550)
20.32 (0.800)
17.78 (0.700)
LEAD ASSIGNMENTS
1 - ANODE
2 - CATHODE
3 - ANODE
1/4-20 SLOTTED HEX
OUTLINE TO-244AB (ISOLATED)
Dimensions in Millimeters and (Inches)
15.75 (0.620)
14.99 (0.590)
3.35 (0.132)
3.02 (0.119)


Part Number HFA200MD40D
Description Ultrafast Soft Recovery Diode
Maker IRF
PDF Download

HFA200MD40D Datasheet PDF






Similar Datasheet

1 HFA200MD40C Ultrafast/ Soft Recovery Diode
International Rectifier
2 HFA200MD40C Soft Recovery Diode
INCHANGE
3 HFA200MD40D Ultrafast Soft Recovery Diode
IRF





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy