MP6003 Datasheet | Monolithic Power Systems

DESCRIPTION The MP6003 is a monolithic flyback DC-DC converter which includes a 150V power switch and is capable of delivering up to 15W output power. It can also be used for SEPIC boost and Flyback and Forward applications. The MP6003 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. The MP6003 can also skip cycles to maintain zero load regulation. It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired. The MP6003 is ideal for tele applications, and is available in a pact, thermally enhanced SOIC8 package with an exposed pad. TYPICAL APPLICATION Monolithic Flyback/SEPIC DC-DC Converter FEATURES - Integrated 0.9Ω 150V Power Switch - Cycle-by-Cycle Current Limiting - Programmable Switching Frequency - Duty Cycle Limiting with Line Feed Forward - Integrated 100V Startup Circuit - Internal Slope pensation - Disable Function - Built-in Soft-Start - Line Under Voltage Lockout - Line Over Voltage Protection - Auto-Restart for Opened/Shorted Output - Zero Load Regulation - Thermal Shutdown APPLICATIONS - Tele Equipment - Vo IP Phones, Power over Ethernet (Po E) - Distributed Power Conversion All MPS parts are lead-free and adhere to the Ro HS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. MP6003 Rev. 1.01 .Monolithic Power. 1/26/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2014 MPS. All Rights Reserved. - MONOLITHIC FLYBACK/SEPIC DC-DC CONVERTER ORDERING INFORMATION Part Number- MP6003DN Package SOIC8E Top Marking MP6003 Free Air Temperature (TA) -40°C to +85°C - For Tape & Reel, add suffix - Z (eg. MP6003DN- Z). For Ro HS pliant...