MAX4106 Datasheet | Maxim Integrated

Description The MAX4106/MAX4107 op amps bine high-speed performance with ultra-low-noise performance. The MAX4106 is pensated for closed-loop gains of 5V/V, while the MAX4107 is stable in closed-loop gains of 10V/V or greater. The MAX4106/MAX4107 require only 15m A of supply current while delivering a 350MHz or a 300MHz bandwidth, respectively. Voltage noise is an ultra-low 0.75n V/√Hz, while a low-distortion architecture provides a spurious-free dynamic range (SFDR) of 63d B at 5MHz. These high-speed op amps have a wide output voltage swing of ±3.2V and a high current-drive capability of 80m A. MAX4106/MAX4107 ________________________Applications Ultra-Low-Noise ADC Preamp Ultrasound Low-Noise Preamplifier High-Performance Receivers Active Filters Pulse/RF Amplifier ______________Ordering Information PART MAX4106ESA MAX4107ESA TEMP. RANGE -40°C to +85°C -40°C to +85°C PIN-PACKAGE 8 SO 8 SO ________Typical Application Circuit +5V 0.1µF __________________Pin Configuration TOP VIEW 1000p F INPUT MAX4107 8 to 16-BIT HIGH-SPEED ADC N.C. 1 IN- 2 MAX4106 MAX4107 8 7 6 5 N.C. VCC OUT N.C. 0.1µF 1000p F -5V RF 240Ω IN+ 3 VEE 4 RG 27Ω ADC BUFFER WITH GAIN (AVCL = 10V/V) ________________________________________________________________ Maxim Integrated Products Call toll free 1-800-998-8800 for free samples or literature. 350MHz, Ultra-Low-Noise Op Amps MAX4106/MAX4107 ABSOLUTE MAXIMUM RATINGS Power-Supply Voltage (VCC to VEE) 12V Voltage on Any Pin to Ground or Any Other Pin VCC to VEE Short-Circuit Duration (VOUT to GND) Continuous Continuous Power Dissipation (TA = +70°C) SO (derate 5.88m W/°C above +70°C) 471m W Operating Temperature Range MAX4106ESA/MAX4107ESA -40°C to +85°C Storage Temperature Range -65°C to +160°C Junction Temperature +150°C Lead...