Datasheet4U Logo Datasheet4U.com

SY88315BL - CML Low-Power Limiting Post Amplifier w/TTL Signal Detect

Features

  • Single 3.3V power supply The SY88315BL low-power limiting post amplifier is designed for use in fiber-optic receivers. The device.
  • DC to 3.2Gbps operation connects to typical transimpedance amplifiers (TIAs).
  • Low-noise CML data outputs The linear signal output from TIAs can contain.
  • Chatter-free Open-Collector TTL signal detect (SD) significant amounts of noise and may vary in amplitude output with internal 4.75kΩ pull-up resistor over time. The SY88315BL q.

📥 Download Datasheet

Datasheet Details

Part number SY88315BL
Manufacturer Micrel Semiconductor
File Size 417.18 KB
Description CML Low-Power Limiting Post Amplifier w/TTL Signal Detect
Datasheet download datasheet SY88315BL Datasheet

📁 Similar Datasheet

  • SY88303BL - 3.2 Gbps CML Limiting Post Amplifier (Microchip)
  • SY88343BL - 3.2 Gbps CML Limiting Post Amplifier (Microchip)
  • SY8801 - Bluetooth headset smart charging case solution (TPS)
  • SY8802 - Bluetooth headset smart charging case solution (TPS)
  • SY8803 - Bluetooth headset smart charging case solution (TPS)
  • SY8805A - 5A Synchronous Step Down Regulator (Silergy)
  • SY8810 - Bluetooth headset smart charging case solution (TPS)
  • SY8812 - Bluetooth headset charging case solution (TPS)
  • SY88149HL - 3.3V 1.25Gbps Burst-Mode Limiting Amplifier (MICREL)
  • SY8815 - Bluetooth headset charging case solution (TPS)
Other Datasheets by Micrel Semiconductor
  • SY88313BL - CML Low-Power Limiting Post Amplifier
  • SY88309BL - 3.2Gbps PECL Limiting Post Amplifier
  • SY88343BL - CML Limiting Post Amplifier
  • SY88343DL - CML Limiting Post Amplifier
  • SY88345BL - CML Low-Power Limiting Post Amplifier w/ High-Gain TTL Signal Detect
  • SY88347DL - PECL Limiting Post Amplifier
  • SY88353BL - Limiting Post Amplifier
  • SY88022AL - 11.3Gbps Laser Diode Driver

Full PDF Text Transcription

Click to expand full text
SY88315BL 3.3V, 3.2Gbps CML Low-Power Limiting Post Amplifier w/TTL Signal Detect General Description Features • Single 3.3V power supply The SY88315BL low-power limiting post amplifier is designed for use in fiber-optic receivers. The device • DC to 3.2Gbps operation connects to typical transimpedance amplifiers (TIAs). • Low-noise CML data outputs The linear signal output from TIAs can contain • Chatter-free Open-Collector TTL signal detect (SD) significant amounts of noise and may vary in amplitude output with internal 4.75kΩ pull-up resistor over time. The SY88315BL quantizes these signals and • TTL EN input outputs CML level waveforms. • Internal 50Ω input termination The SY88315BL operates from a single +3.
Published: |