Datasheet4U Logo Datasheet4U.com

PTN3355 - Low power DisplayPort to VGA adapter

Description

PTN3355 is a DisplayPort to VGA adapter with an integrated 1 : 2 VGA switch optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector.

Features

  • 2.1 VESA-compliant DisplayPort converter.
  • Main Link: 1-lane and 2-lane modes supported.
  • HBR (High Bit Rate) at 2.7 Gbit/s per lane.
  • RBR (Reduced Bit Rate) at 1.62 Gbit/s per lane.
  • BER (Bit Error Rate) better than 109.
  • DisplayPort Link down-spreading supported.
  • 1 MHz AUX channel.
  • Supports native AUX CH syntax.
  • Supports I2C-bus over AUX CH syntax.
  • Active HIGH Hot Plug Detect (HPD) signal to the source 2.2 VESA-compliant eDP extensions.
  • Supports Al.

📥 Download Datasheet

Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
PTN3355 Low power DisplayPort to VGA adapter with integrated 1 : 2 VGA switch Rev. 3.1 — 4 November 2016 Product data sheet 1. General description PTN3355 is a DisplayPort to VGA adapter with an integrated 1 : 2 VGA switch optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector. PTN3355 integrates a DisplayPort receiver, a high-speed triple video digital-to-analog converter and 1 : 2 VGA switch that supports a wide range of display resolutions, for example, VGA to WUXGA (see Table 9). PTN3355 supports either one or two DisplayPort lanes operating at either 2.7 Gbit/s or 1.62 Gbit/s per lane. PTN3355 supports I2C-bus over AUX per DisplayPort standard (Ref.
Published: |