Datasheet4U Logo Datasheet4U.com

TDA8946J - 2 x 15 W stereo Bridge Tied Load BTL audio amplifier

Description

The TDA8946J is a dual-channel audio power amplifier with an output power of 2 × 15 W at an 8 Ω load and a 18 V supply.

The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic.

The TDA8946J comes in a 17-pin DIL-bent-SIL (DBS) power package.

Features

  • s s s s s s s s s Few external components Fixed gain Standby and mute mode No on/off switching plops Low standby current High supply voltage ripple rejection Outputs short-circuit protected to ground, supply and across the load Thermally protected Printed-circuit board compatible. c c 3.

📥 Download Datasheet

Datasheet preview – TDA8946J

Datasheet Details

Part number TDA8946J
Manufacturer NXP
File Size 393.97 KB
Description 2 x 15 W stereo Bridge Tied Load BTL audio amplifier
Datasheet download datasheet TDA8946J Datasheet
Additional preview pages of the TDA8946J datasheet.

📁 Similar Datasheet

  • TDA8946AJ - 2 x 15 W BTL audio amplifier (Philips)
  • TDA8944AJ - 2 x 7 W BTL audio amplifier (Philips)
  • TDA8948 - 7W audio amplifier (ETC)
  • TDA8948J - 4-channel audio amplifier (NXP Semiconductors)
  • TDA8920TH - Class-D audio amplifier 2 x 80W Single chip (Philips)
  • TDA8921TH - Class-D audio amplifier 2 x 50W single chip (Philips)
  • TDA8922B - 2 X 50 W class-D power amplifier (NXP Semiconductors)
  • TDA8925 - Power stage 2 x 15 to 25Wclass-D audio amplifier (NXP Semiconductors)
  • TDA8928J - Power stage 2 x 10 or 1 x 20 W class-D audio amplifie (NXP Semiconductors)
  • TDA8933 - Class-D audio amplifier (NXP Semiconductors)
Other Datasheets by NXP
  • TDA8941P - 1.5 W mono Bridge Tied Load BTL audio amplifier
  • TDA8942P - 2 x 1.5 W stereo Bridge Tied Load BTL audio amplifier
  • TDA8943SF - 6 W mono Bridge Tied Load BTL audio amplifier
  • TDA8944J - 2 x 7 W stereo Bridge Tied Load BTL audio amplifier
  • TDA8945S - 15 W mono Bridge Tied Load BTL audio amplifier
  • TDA8947J - 4-channel audio amplifier
  • TDA8920 - 2 x 50 W class-D power amplifier
  • TDA8920B - 2 X 100 W class-D power amplifier

Full PDF Text Transcription

Click to expand full text
TDA8946J 2 x 15 W stereo Bridge Tied Load (BTL) audio amplifier Rev. 02 — 14 March 2000 Product specification 1. General description The TDA8946J is a dual-channel audio power amplifier with an output power of 2 × 15 W at an 8 Ω load and a 18 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The TDA8946J comes in a 17-pin DIL-bent-SIL (DBS) power package. The TDA8946J is printed-circuit board (PCB) compatible with all other types in the TDA894x family. One PCB footprint accommodates both the mono and the stereo products. 2.
Published: |