Datasheet4U Logo Datasheet4U.com

54ACQ245 - Quiet Series Octal Bidirectional Transceiver

Description

The ’ACQ/’ACTQ245 contains eight non-inverting bidirectional buffers with TRI-STATE outputs and is intended for bus-oriented applications.

Current sinking capability is 24 mA at both the A and B ports.

Features

  • GTO™ output control and undershoot corrector in addition to a split ground bus for superior performance. Features n ICC and IOZ reduced by 50% n Guaranteed simultaneous switching noise level and dynamic threshold performance n Improved latch-up immunity n TRI-STATE outputs drive bus lines or buffer memory address registers n Outputs source/sink 24 mA n Faster prop delays than the standard ’ACT245 n 4 kV minimum ESD immunity (’ACQ) n Standard Military Drawing (SMD).
  • ’ACTQ245: 5962-92187.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
54AC11002 QUADRUPLE 2-INPUT POSITIVE-NOR GATES Texas Instruments
54AC11010 TRIPLE 3-INPUT POSITIVE-NAND GATES Texas Instruments
54AC11011 TRIPLE 3-INPUT POSITIVE-AND GATES Texas Instruments
54AC11021 Dual 4-Input Positive-AND Gates Texas Instruments
54AC11027 TRIPLE 3-INPUT POSITIVE-NOR GATES Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
54ACQ240 Quiet Series Octal Buffer/Line Driver
54ACQ244 Quiet Series Octal Buffer/Line Driver
54ACQ373 Quiet Series Octal Transparent Latch
54ACQ374 Quiet Series Octal D Flip-Flop
54ACQ573 Quiet Series Octal Latch

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 54ACQ245 • 54ACTQ245 Quiet Series Octal Bidirectional Transceiver with TRI-STATE Inputs/Outputs September 1998 54ACQ245 • 54ACTQ245 Quiet Series Octal Bidirectional Transceiver with TRI-STATE ® Inputs/Outputs General Description The ’ACQ/’ACTQ245 contains eight non-inverting bidirectional buffers with TRI-STATE outputs and is intended for bus-oriented applications. Current sinking capability is 24 mA at both the A and B ports. The Transmit/Receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (active-HIGH) enables data from A ports to B ports; Receive (active-LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a HIGH Z condition.
Published: |