NCP1594B
NCP1594B is Buck Converter manufactured by onsemi.
- Part of the NCP1594A comparator family.
- Part of the NCP1594A comparator family.
features include cycle- by- cycle current limit, 92% max duty cycle, short- circuit protection, and thermal shutdown.
Features
- Wide Input Voltage Range from 2.9 V to 6.0 V
- Nine Preset Output Voltages (0.6 V, 0.7 V, 0.8 V, 1.0 V, 1.2 V, 1.5 V,
1.8 V, 2.0 V, and 2.5 V)
- Adjustable Output Voltage Down to 0.6 V
- Adjustable 500 k Hz to 2 MHz Switching Frequency
- Externally Adjustable Soft- Start and Able to Start Up with
Pre- Biased Output Load
- Selectable Forced PWM with and without Pre- biased Startup
- patible with Ceramic, Polymer, and Electrolytic Output
Capacitors
- Cycle- by- Cycle Current Limiting
- Hiccup Mode Short- Circuit Protection
- Over Temperature Protection
- This is a 24 Pin 4 x 4 mm 0.5P WQFN Pb- Free Device
- These are Pb- Free Devices
Typical Applications
- Tele and Networking Power Management
- puting Power Management
- Data Power Management
- Point of Load
- ASIC/CPU/DSP Core and I/O Voltages
- DDR Termination Voltage
.onsemi.
MARKING DIAGRAM
24 PIN WQFN MT SUFFIX CASE 510BC 1
NCP 1594x ALYWG
G x
= A or B
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb- Free...
