900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

NCV511 Datasheet

Low-Dropout Voltage Regulator

No Preview Available !

NCP511, NCV511
Voltage Regulator - CMOS,
Low Iq, Low-Dropout
150 mA
The NCP511 series of fixed output low dropout linear regulators are
designed for handheld communication equipment and portable battery
powered applications which require low quiescent current. The
NCP511 series features an ultralow quiescent current of 40 mA. Each
device contains a voltage reference unit, an error amplifier, a PMOS
power transistor, resistors for setting output voltage, current limit, and
temperature limit protection circuits.
The NCP511 has been designed to be used with low cost ceramic
capacitors and requires a minimum output capacitor of 1.0 mF. The
device is housed in the microminiature TSOP5 surface mount
package. Standard voltage versions are 1.5 V, 1.8 V, 2.5 V, 2.7 V, 2.8 V,
3.0 V, 3.3 V, and 5.0 V. Other voltages are available in 100 mV steps.
Features
Low Quiescent Current of 40 mA Typical
Low Dropout Voltage of 100 mV at 100 mA
Excellent Line and Load Regulation
Maximum Operating Voltage of 6.0 V
Low Output Voltage Option
High Accuracy Output Voltage of 2.0%
Industrial Temperature Range of 40°C to 85°C
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AECQ100
Qualified and PPAP Capable
These are PbFree Devices
Typical Applications
Cellular Phones
Battery Powered Instruments
HandHeld Instruments
Camcorders and Cameras
Vin
1
Thermal
Shutdown
Driver w/
Current
Limit
Vout
5
Enable
ON 3
OFF
GND 2
This device contains 82 active transistors
Figure 1. Representative Block Diagram
© Semiconductor Components Industries, LLC, 2015
October, 2019 Rev. 13
1
www.onsemi.com
TSOP5
SN SUFFIX
CASE 483
PIN CONNECTIONS AND
MARKING DIAGRAM
Vin 1
GND 2
5 Vout
Enable 3
4 N/C
(Top View)
xxx = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G = PbFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
Publication Order Number:
NCP511/D


  ON Semiconductor Electronic Components Datasheet  

NCV511 Datasheet

Low-Dropout Voltage Regulator

No Preview Available !

NCP511, NCV511
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁPIN FUNCTION DESCRIPTION
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁPin No.
Pin Name
Description
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ1 Vin Positive power supply input voltage.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ2
GND
Power supply ground.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ3
Enable
This input is used to place the device into lowpower standby. When this input is pulled low, the device
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁis disabled. If this function is not used, Enable should be connected to Vin.
4 N/C No internal connection.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ5 Vout Regulatedoutputvoltage.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁInput Voltage
Vin 0 to 6.0
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁEnable Voltage
Enable
0.3 to Vin +0.3
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁOutput Voltage
Vout 0.3 to Vin +0.3
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁPower Dissipation and Thermal Characteristics
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁPower Dissipation
Thermal Resistance, Junction to Ambient
PD
RqJA
Internally Limited
250
W
°C/W
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁOperating Junction Temperature
TJ +150 °C
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁOperating Ambient Temperature
TA 40 to +85 °C
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁStorage Temperature
Tstg 55 to +150
°C
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁStresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁshould not be assumed, damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MILSTD883, Method 3015
Machine Model Method 200 V
2. Latch up capability (85°C) ±100 mA DC with trigger voltage.
www.onsemi.com
2


Part Number NCV511
Description Low-Dropout Voltage Regulator
Maker ON Semiconductor
PDF Download

NCV511 Datasheet PDF






Similar Datasheet

1 NCV5104 Half Bridge Driver
ON Semiconductor
2 NCV511 Low-Dropout Voltage Regulator
ON Semiconductor
3 NCV51190 1.5A DDR Memory Termination Regulator
ON Semiconductor
4 NCV51198 1.5A DDR Memory Termination Regulator
ON Semiconductor
5 NCV51199 Termination Regulator
ON Semiconductor
6 NCV51200 3 Amp Termination Regulator
ON Semiconductor
7 NCV51400 3Amp Termination Regulator
ON Semiconductor
8 NCV51411 Low Voltage Buck Regulator
ON Semiconductor
9 NCV51460 20mA Micropower Precision Voltage Reference
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy