AN8011S - 2-channel step-down/ step-up/ or inverting use DC-DC converter controller

Product Overview

Panasonic Semiconductor

Part number	AN8011S
Manufacturer	Panasonic Semiconductor
File Size	161.91 KB
Description	2-channel step-down/ step-up/ or inverting use DC-DC converter controller
Datasheet	AN8011S Datasheet
Additional preview pages of the AN8011S datasheet.

Pin No.

PWM control frequency of 500 kHz is available.
Wide operating supply voltage range 1.27 (0.605) 0.40±0.25 (VCC = 3.6 V to 34 V) Seating plane Seating plane.
Built-in 2-channel of open collector type for output (A single-channel is also usable for inverted SOP016-P-0225A amplification type).
Each output can be stopped independently by the external control.
Built-in on/off function for the operation/stop of IC Incorporating circuit for short-circui.

📁 Similar Datasheet

AN80196CA - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
AN80196CB - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
AN804 - P-Channel MOSFET (Vishay Siliconix)
AN805 - PWM Optimized Power MOSFET (Vishay Siliconix)
AN8053N - 1.0W Power Amplifier (Matsushita)
AN809 - Digitally Addressable DALI Dimming Ballast (Microchip)
AN8096JC - (AN8x9xJC) Advanced 16-Bit Microcontroller (Intel)
AN809xJC - (AN8x9xJC) Advanced 16-Bit Microcontroller (Intel)

Other Datasheets by Panasonic Semiconductor

AN8010 - 3-pin/ positive output/ low dropout voltage regulator
AN8010M - 3-pin/ positive output/ low dropout voltage regulator
AN8013SH - Single-channel step-up or step-down DC-DC converter controller
AN8014 - Step-down/ step-up/ or inverting DC-DC converter controller
AN8014S - Step-down/ step-up/ or inverting DC-DC converter controller
AN8015SH - Single-channel step-down/ step-up/ or inverting use DC-DC converter controller

Published: Mar 26, 2005 |