AZ921 - ULTRA-SENSITIVE SUBMINIATURE RELAY

Zettler

Key Features

5 Amp switching capability.
Extremely small footprint utilizing only 0.16 square inch of PCB area.
Thin vertical profile only 0.2" wide.
Dielectric strength 3000Vrms contact to coil.
Bifurcated contacts available.
Epoxy sealed.
Class B (130°C) standard.
Class F (155°C) versions available.
UL,CUR file E43203.
TÜV 50243813-1.

AZ921 ultra-sensitive subminiature relay by Zettler - Datasheet Preview

Datasheet Details

Part number	AZ921
Manufacturer	Zettler
File Size	615.15 KB
Description	ULTRA-SENSITIVE SUBMINIATURE RELAY
Datasheet	AZ921 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
AZ920	ULTRA-SENSITIVE SUBMINIATURE RELAY	American Zettler
AZ9143-04F	TVS DIODE	Leiditech
AZ9315-01F	Transient Voltage Suppressing Device	msksemi
AZ934	20 AMP SUB-MINIATURE POWER RELAY	ZETTLER Electronics
AZ935	20 AMP SUB-MINIATURE POWER RELAY	ZETTLER Electronics

Other Datasheets by Zettler

Part Number	Description
AZ9201	ULTRA-SENSITIVE SUBMINIATURE RELAY
AZ9371	SENSITIVE SUBMINIATURE RELAY
AZ943	MINIATURE PC BOARD RELAY
AZ947	POWER RELAY
AZ9481	16 AMP LOW PROFILE POWER RELAY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

AZ921 ULTRA-SENSITIVE SUBMINIATURE RELAY FEATURES • 5 Amp switching capability • Extremely small footprint utilizing only 0.16 square inch of PCB area • Thin vertical profile only 0.2" wide • Dielectric strength 3000Vrms contact to coil • Bifurcated contacts available • Epoxy sealed • Class B (130°C) standard • Class F (155°C) versions available • UL,CUR file E43203 • TÜV 50243813-1 CONTACTS Arrangement SPST (1 Form A), single button contact or bifurcated Ratings Rated Load UL, CUR TÜV Resistive load: Max. switched power: 150W or 1250VA Max. switched current: 5A Max. switched voltage: 150VDC* or 250VAC Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.