Datasheet4U Logo Datasheet4U.com

TS5V330C - QUAD SPDT WIDE BANDWIDTH VIDEO SWITCH

Description

The TS5V330C is a 4-bit 1-of-2 multiplexer/demultiplexer video switch with a single switch-enable (EN) input.

The select (IN) input controls the data path of the multiplexer/demultiplexer.

When EN is low, the switch is enabled and the D port is connected to the S port.

Features

  • 1.
  • Low Differential Gain and Phase (Typical DG = 0.24%, Typical DP = 0.039°).
  • Wide Bandwidth (Typical BW > 288 MHz).
  • Low Cross-Talk (Typical XTALK =.
  • 87 dB).
  • Low Power Consumption (Maximum ICC = 3 μA).
  • Bidirectional Data Flow, With Near-Zero Propagation Delay.
  • Low ON-State Resistance (Typical rON = 3 Ω).
  • VCC Operating Range From 4.5 V to 5.5 V.
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Data and Contro.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS507 High precision rail-to-rail operational amplifier STMicroelectronics
TS5070 PROGRAMMABLE CODEC/FILTER COMBO 2ND GENERATION STMicroelectronics
TS5071 PROGRAMMABLE CODEC/FILTER COMBO 2ND GENERATION STMicroelectronics
TS50P05G 600V - 1000V Standard Bridge Rectifier Taiwan Semiconductor
TS50P06G 600V - 1000V Standard Bridge Rectifier Taiwan Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TS5V330 QUAD SPDT WIDE-BANDWIDTH VIDEO SWITCH
TS5V522C 5-BITS VIDEO EXCHANGE SWITCH
TS5A1066 SPST ANALOG SWITCH
TS5A12301E SPDT Analog Switch
TS5A2053 SINGLE-CHANNEL 10-OHM SPDT ANALOG SWITCH

Full PDF Text Transcription

Click to expand full text
TS5V330C www.ti.com SCDS276B – APRIL 2009 – REVISED DECEMBER 2009 QUAD SPDT WIDE BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE Check for Samples: TS5V330C FEATURES 1 • Low Differential Gain and Phase (Typical DG = 0.24%, Typical DP = 0.039°) • Wide Bandwidth (Typical BW > 288 MHz) • Low Cross-Talk (Typical XTALK = –87 dB) • Low Power Consumption (Maximum ICC = 3 μA) • Bidirectional Data Flow, With Near-Zero Propagation Delay • Low ON-State Resistance (Typical rON = 3 Ω) • VCC Operating Range From 4.5 V to 5.5 V • Ioff Supports Partial-Power-Down Mode Operation • Data and Control Inputs Provide Undershoot Clamp Diode • Control Inputs Can be Driven by TTL or 5-V/3.
Published: |