AT76C713 Datasheet (ATMEL Corporation)

AT76C713, USB BRIDGE CONTROLLER

Table 5-1.

Signal Description Type: I = Input, O = Output, I/O = Bi-directional, A = Analog Signal Name JTAG Signals TCK TDI TDO TMS Port Signals Port A is used in configurations with external memory, where it acts as the AD0-7 address and/or data bus.

If the alternative function of the port is not

AT76C713 Features

* Advanced RISC Architecture, 130 Powerful Instructions, Most Single-Clock Cycle Execution

* Clock Generator Provides CPU Rates up to 48 MHz

* Only One External Clock Crystal of 12 MHz Can Generate All the Required System Clocks:

* Internal Clock for Standard UART Ra