Part number:
AT89C5115
Manufacturer:
ATMEL Corporation
File Size:
869.21 KB
Description:
Low pin countl 8-bit microcontroller.
AT89C5115 Datasheet (869.21 KB)
* 80C51 Core Architecture
* 256 Bytes of On-chip RAM
* 256 Bytes of On-chip XRAM
* 16K Bytes of On-chip Flash Memory
* Data Retention: 10 Years at 85°C
* Erase/Write Cycle: 100K
* 2K Bytes of On-chip Flash for Bootloader
* 2K Bytes of O
AT89C5115 Datasheet (869.21 KB)
AT89C5115
ATMEL Corporation
869.21 KB
Low pin countl 8-bit microcontroller.
📁 Related Datasheet
AT89C51 - 8-Bit Microcontroller
(ATMEL)
Features
• Compatible with MCS-51™ Products • 4K Bytes of In-System Reprogrammable Flash Memory
– Endurance: 1,000 Write/Erase Cycles • Fully Static O.
AT89C5121 - 8-bit Microcontroller
(ATMEL Corporation)
Features
• 80C51 Core
– 12 or 6 Clocks per Instruction (X1 and X2 Modes) – 256 Bytes Scratchpad RAM – Dual Data Pointer – Two 16-bit Timer/Counters: T.
AT89C5122 - (AT8xx512x) Smart Card Reader ICs
(ATMEL Corporation)
Features
• 80C51 Core : • • • • • • •
– 6 Clocks per Instruction – Speed up to 16 MHz 768 Bytes RAM AT83C5122: 32 Kbytes ROM AT83C5123: 30 Kbytes ROM .
AT89C5130A-M - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enh.
AT89C5131 - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24MHz in X2 Mode – Dual Data Pointer – Full-duplex Enha.
AT89C5131A - USB Microcontrollers
(ATMEL Corporation)
Features
.. • Protocol
– USB Used as Physical Layer – Device Firmware Upgrade Class Compliant – USB Clock Auto-Configuration • In-Sy.
AT89C5131A-L - 8-bit Flash Microcontroller
(ATMEL)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode
– Dual Data Pointer – Full-duplex Enh.
AT89C5131A-M - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enh.
