Part number:
AT89C5121
Manufacturer:
ATMEL Corporation
File Size:
864.85 KB
Description:
8-bit microcontroller.
AT89C5121 Datasheet (864.85 KB)
* 80C51 Core
* 12 or 6 Clocks per Instruction (X1 and X2 Modes)
* 256 Bytes Scratchpad RAM
* Dual Data Pointer
* Two 16-bit Timer/Counters: T0 and T1 T83C5121 with 16 Kbytes Mask ROM T85C5121 with 16 Kbytes Code RAM T89C5121 with 16 Kbytes Code RAM and 16 Kbyt
AT89C5121 Datasheet (864.85 KB)
AT89C5121
ATMEL Corporation
864.85 KB
8-bit microcontroller.
📁 Related Datasheet
AT89C5122 - (AT8xx512x) Smart Card Reader ICs
(ATMEL Corporation)
Features
• 80C51 Core : • • • • • • •
– 6 Clocks per Instruction – Speed up to 16 MHz 768 Bytes RAM AT83C5122: 32 Kbytes ROM AT83C5123: 30 Kbytes ROM .
AT89C51 - 8-Bit Microcontroller
(ATMEL)
Features
• Compatible with MCS-51™ Products • 4K Bytes of In-System Reprogrammable Flash Memory
– Endurance: 1,000 Write/Erase Cycles • Fully Static O.
AT89C5115 - Low Pin Countl 8-bit Microcontroller
(ATMEL Corporation)
Features
• 80C51 Core Architecture • 256 Bytes of On-chip RAM • 256 Bytes of On-chip XRAM • 16K Bytes of On-chip Flash Memory
– Data Retention: 10 Yea.
AT89C5130A-M - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enh.
AT89C5131 - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24MHz in X2 Mode – Dual Data Pointer – Full-duplex Enha.
AT89C5131A - USB Microcontrollers
(ATMEL Corporation)
Features
.. • Protocol
– USB Used as Physical Layer – Device Firmware Upgrade Class Compliant – USB Clock Auto-Configuration • In-Sy.
AT89C5131A-L - 8-bit Flash Microcontroller
(ATMEL)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode
– Dual Data Pointer – Full-duplex Enh.
AT89C5131A-M - 8-bit Flash Microcontroller
(ATMEL Corporation)
Features
• 80C52X2 Core (6 Clocks per Instruction) – Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode – Dual Data Pointer – Full-duplex Enh.
